This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED63X60B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD63X60B
The AirTAC ACPD Double Rod Compact Cylinder ACPD63X60B is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø63mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED63X60B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- StatusDiscontinued → ACED63X60B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD63X60B
A double acting compact cylinder with a rod leaving both covers, the ACPD63X60B delivers 1458.1 N at 0.5 MPa in either direction because both strokes work on the rod-side area of the 63 mm bore. The through-rod resists rotation and side load, gives a symmetric mount, and the rear rod can carry a sensor flag. Its short ISO 21287 body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and gantries.
This 63 mm model is discontinued; the current-production direct is ACED63X60, which matches the same bore, stroke and force class. Confirm the ISO 21287 mounting dimensions before swapping, since the ACP is DIN-standard. The body is hard-anodized aluminium with an S45C hard-chrome rod, fixed TPU bumpers at both ends, a 1/8" PT port, and a male rod thread from the B code. Running range is 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s.
Airtac ACPD Double Rod Compact Cylinder ACPD63X60B Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD63X60B |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED63X60B |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED63X60B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD63X60B
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD63X60B Is Used
Symmetric press fixture
The 1458.1 N equal output in both directions suits a machining-center jig that clamps and releases with identical force, with the 60 mm stroke clearing the part quickly.
Reciprocating slide drive
A through-rod on a pick-and-place slide resists rotation and side load, and the rear rod carries a flag for position feedback when the -S magnet is ordered.
Pallet-stacker lift assist
With about 875 N of usable force at 0.5 MPa, roughly 74 kg can be lifted vertically with margin, matching a loaded pallet clamp arm in a warehouse cell.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD63X60B with the ACED63X60B
At 1458.1 N per side at 0.5 MPa, this bore sits between the 50 mm (881.2 N) and 80 mm (2356.2 N) double-rod sizes; step down for lighter clamps or up for heavy press fixtures. The 60 mm stroke is well inside the 250 mm standard limit for bore 63. Note that a plain double-rod cylinder drifts when air is lost, so add a rod lock or pilot check if the load must stay put. Mounting brackets bolt to the ISO 21287 face, and the optional -S magnet enables CMSE / DMSE switches - this unit has no magnet fitted. Order ACED63X60 as the current replacement.
Replacement checklist
- ✓ Current-production ACE → ACED63X60B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD63X60B FAQ
Because a rod exits both covers, force is equal in both directions: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, both on the rod-side area of the 63 mm bore. Maximum force at 1.0 MPa is 297.4 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof, and speed runs 30-500 mm/s.
No - this model is discontinued. The current-production direct is ACED63X60 (swap the P for an E), which matches the same bore, stroke and force class; confirm the ISO 21287 mounting dimensions before swapping since the ACP is DIN-standard. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, ends carry fixed TPU bumpers, the rod end is male thread (B code), the port is 1/8" PT, and CMSE / DMSE switches work only when the optional -S magnet is ordered.
Related AirTAC ACE Cylinders
Request a Quote for the ACED63X60B
Send us the quantity and destination. We confirm price, stock and lead time on the ACED63X60B replacement — usually within 7-8 hours.