This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED63X65SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD63X65SB
The AirTAC ACPD Double Rod Compact Cylinder ACPD63X65SB is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø63mm bore and 65mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED63X65SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke65 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- StatusDiscontinued → ACED63X65SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD63X65SB
A double acting compact cylinder with a rod leaving both covers, the ACPD63X65SB pushes and pulls with identical output: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa in each direction, because both strokes work on the rod-side area. The 63 mm bore carries a 16 mm through-rod with a male thread (B code) on each end, and the 65 mm stroke sits well inside the 250 mm standard range for this bore. The through-rod resists rotation and side load, gives a symmetric mount, and leaves the rear rod free to carry a sensor flag.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures and guarding. This model carries the optional -S magnet, so CMSE or DMSE switches can be fitted for end-position sensing. Note that the ACPD family is discontinued: the current direct is ACED63X65, and you should confirm the ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD63X65SB Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD63X65SB |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED63X65SB |
| Bore size | Ø63 mm |
| Stroke | 65 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED63X65SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD63X65SB
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD63X65SB Is Used
Reciprocating transfer carriage
The through-rod drives a pallet carriage on a packaging line with equal 1458.1 N push and pull, so return strokes index at the same speed and force as the advance.
Two-sided press fixture
A machining cell uses the front rod to clamp a housing while the rear rod carries a CMSE switch flag, giving position feedback without extra hardware on the 65 mm stroke.
Conveyor gate diverter
A food-line diverter gate swings on the male-threaded rod ends, where the symmetric double-rod mount resists the side load of the gate and the fixed TPU bumper softens both ends of travel.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD63X65SB with the ACED63X65SB
Choose this model when a job needs equal force in both directions at a short stroke: 1458.1 N per side at 0.5 MPa covers clamping and reciprocating tasks in the 63 mm class. If the load is lighter, an ACPD50 at 881.2 N may suffice; if it is heavier, step up to an ACPD80 at 2356.2 N. Remember the piston drifts when air is lost, so add a rod lock or pilot check for a held load. FA/FB flange and LB foot mountings bolt to the standard face, the -S magnet on this unit accepts CMSE / DMSE switches, and the current-production replacement is ACED63X65.
Replacement checklist
- ✓ Current-production ACE → ACED63X65SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD63X65SB FAQ
Yes. Because a rod exits both covers, both strokes use the rod-side area, so force is equal both ways: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, with a maximum of 297.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 1/8" port depends only on the 63 mm bore.
Order ACED63X65, the current-production ISO 21287 successor: swap the P for an E and you get the same 63 mm bore, 65 mm stroke and force class in a short compact body. The ACP is DIN-standard, so confirm the ISO 21287 mounting dimensions before swapping. This unit already carries the -S magnet for CMSE / DMSE switches; on the ACE, the magnet remains an option you must order.
Related AirTAC ACE Cylinders
Request a Quote for the ACED63X65SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACED63X65SB replacement — usually within 7-8 hours.