This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED63X90B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD63X90B
The AirTAC ACPD Double Rod Compact Cylinder ACPD63X90B is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø63mm bore and 90mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED63X90B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke90 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- StatusDiscontinued → ACED63X90B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD63X90B
A double acting compact cylinder with a rod through both covers, the ACPD63X90B delivers 1458.1 N in each direction at 0.5 MPa, because both strokes work on the rod-side area of the 63 mm bore. The male-threaded 16 mm rod exits each end, so the back-end rod can carry a sensor flag or a second tooling plate while the through-rod resists rotation and side load. This model is discontinued; the current-production successor is the ACED63X90.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits tight gantries and fixture plates. At 0.7 MPa the same bore gives 2041.3 N both ways, and the rod-side rating tops out at 297.4 kgf at 1.0 MPa. A fixed TPU bumper sits at both ends, and the optional -S magnet code enables CMSE / DMSE switches - without it no magnet is fitted.
Airtac ACPD Double Rod Compact Cylinder ACPD63X90B Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD63X90B |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED63X90B |
| Bore size | Ø63 mm |
| Stroke | 90 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED63X90B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD63X90B
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD63X90B Is Used
Reciprocating conveyor pusher
The through-rod drives a pusher bar from either cover at up to 500 mm/s, with 1458.1 N available on both the extend and return stroke for diverting cartons on a packaging line.
Two-sided fixture clamp
A male-threaded rod at each end lets one cylinder clamp a machined aluminium housing from both sides with matched 2041.3 N force at 0.7 MPa, keeping the jig symmetric.
Gantry position flag
Order the -S magnet code and the back-end rod carries a flag past CMSE or DMSE switches for end-of-travel detection on a pick-and-place gantry with only half the length of a full profile cylinder.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD63X90B with the ACED63X90B
For 90 mm of stroke with equal push and pull, this 63 mm bore gives 1458.1 N at 0.5 MPa in both directions. Step down to the 50 mm bore (881.2 N) for lighter clamping, or up to the 80 mm bore (2356.2 N) when the load grows. Note that a plain double-rod cylinder drifts when air is lost, so add a rod lock or pilot check if the load must stay held. FA/FB flange and LB foot mountings bolt to the ISO 21287 face. Since the ACPD is discontinued, order the ACED63X90 and confirm the ISO 21287 mounting dimensions before the swap.
Replacement checklist
- ✓ Current-production ACE → ACED63X90B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD63X90B FAQ
Because a 16 mm rod exits both covers, force is equal in both directions: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, using the rod-side area of the 63 mm bore. The maximum rating is 297.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, and speed runs 30-500 mm/s.
Order the ACED63X90, the current-production ISO 21287 successor: swap the P for an E and you get the same 63 mm bore, 90 mm stroke and force class. The ACP family is DIN-standard, so confirm the ISO 21287 mounting dimensions against your fixture before swapping. FA/FB flange and LB foot options carry over, and the optional -S magnet code still enables CMSE / DMSE switches.
Related AirTAC ACE Cylinders
Request a Quote for the ACED63X90B
Send us the quantity and destination. We confirm price, stock and lead time on the ACED63X90B replacement — usually within 7-8 hours.