Airtac B01-MAC Series Special Purpose Cylinder B01-MAC32X75SCA
The AirTAC Airtac B01-MAC Series Special Purpose Cylinder B01-MAC32X75SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 75mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke75 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B01-MAC Series Special Purpose Cylinder B01-MAC32X75SCA
Short swing arms and pushers are natural territory for the MAC32X75SCA, a 75 mm stroke, 32 mm bore double-acting mini with a pivot eye on its CA back cover and a variable air cushion at each end. Push at 0.5 MPa is 402.2 N, pull is 345.6 N, and the theoretical peak across the range is 82 kgf at 1.0 MPa. Around 241 N is the realistic working figure, supporting a payload of about 20 kg lifted vertically with a 2:1 margin.
AirTAC builds the round body by rolling the aluminium covers and a stainless block onto the barrel, a joint that stays tight through vibration, while the hard-chrome 12 mm rod resists corrosion in damp shops. Every cylinder leaves the factory with its magnet fitted, so CMSG, DMSG or EMSG switches clip on as standard accessories rather than special orders. The 75 mm travel keeps rod-bending risk low, but alignment to the bore axis still protects the seals.
Airtac B01-MAC Series Special Purpose Cylinder B01-MAC32X75SCA Technical Specifications
| Model | Airtac B01-MAC Series Special Purpose Cylinder B01-MAC32X75SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 75 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-MAC Series Special Purpose Cylinder B01-MAC32X75SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B01-MAC Series Special Purpose Cylinder B01-MAC32X75SCA Is Used
Drill jig clamp lever
Toggles a clamp lever on a bench drilling jig, where 402 N at 0.5 MPa holds workpieces through light machining.
Roller conveyor stopper
Lifts a stopper blade under passing cartons; the 75 mm stroke matches typical pop-up heights and CMSG switches flag the up position.
Autosampler vial lift
Raises vials into a sampling head in a lab analyser, where the stainless barrel tolerates repeated wipe-downs.
Is the Airtac B01-MAC Series Special Purpose Cylinder B01-MAC32X75SCA the Right Cylinder?
Compare on 0.5 MPa push: a 25 mm cylinder gives 245.3 N, this one 402.2 N, and the next size up (40 mm) offers 628.3 N - pick by load, not habit. Speed range 30-800 mm/s; supply 0.15-1.0 MPa (22-145 psi). When the valve centres or air fails, the rod simply slides under load, so a rod lock or check valve is needed for any held position; the cushion is only a damper. The CA eye handles pinned linkages, while FA flange and LB foot brackets convert it to a fixed mount; PT (blank), G and NPT ports cover regional plumbing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-MAC Series Special Purpose Cylinder B01-MAC32X75SCA FAQ
Push is 402.2 N and pull 345.6 N at 0.5 MPa; at 0.7 MPa expect 563.0 N and 483.8 N. The theoretical ceiling at 1.0 MPa is 82 kgf. Connections: 1/8" air ports, M10x1.25 rod thread on the 12 mm chrome rod, 0.15-1.0 MPa (22-145 psi) working band.
Yes, without any special order: every unit ships with the piston magnet built in as standard. CMSG, DMSG or EMSG switches band onto the stainless barrel and slide to any point along the 75 mm travel, giving end-of-stroke or mid-stroke signals to your PLC. Sensing stays reliable across the 30-800 mm/s speed range.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-MAC Series Special Purpose Cylinder B01-MAC32X75SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.