This model is discontinued
AirTAC has phased out the MAL series. You can still order this code here: we ship the direct replacement B01-MBL25X200CA, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac B01-MAL Special Purpose Cylinder B01-MAL25X200CA
The AirTAC Airtac B01-MAL Special Purpose Cylinder B01-MAL25X200CA is a double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 200mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the direct replacement is the B01-MBL25X200CA, which matches its bore, stroke, force and mounting.
- BoreØ25 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B01-MBL25X200CA
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-MAL Special Purpose Cylinder B01-MAL25X200CA
The AirTAC B01-MAL25X200CA is a discontinued double-acting aluminum mini round cylinder. The leading "B01-" prefix marks this as an application-dedicated (customer-specified) variant of the base MAL25X200CA, meaning it is mechanically identical to the standard line but grouped for specific customer builds. Delivering 245 N of push force at 0.5 MPa, it features a 25 mm bore, 200 mm stroke, and a CA pivot back cover. AirTAC replaced the entire MAL series with the MBL line, making MBL25X200CA the direct replacement with the same force, G1/8 port, and mounting footprint.
The legacy MAL body uses threaded front and back covers, whereas the modern MBL features a riveted rolling-packed body for equally robust performance. This SKU lacks a built-in magnet, so it cannot support position sensing without external switches. It relies on a fixed rubber bumper for end-of-stroke damping, and its heterogeneous two-way seal retains grease for a long service life while the carbon-steel rod resists wear via 20 um hard-chrome plating.
Airtac B01-MAL Special Purpose Cylinder B01-MAL25X200CA Technical Specifications
| Model | Airtac B01-MAL Special Purpose Cylinder B01-MAL25X200CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | B01-MBL25X200CA |
| Bore size | Ø25 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The B01-MBL25X200CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
The B01-MBL25X200CA produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B01-MAL Special Purpose Cylinder B01-MAL25X200CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×200 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac B01-MAL Special Purpose Cylinder B01-MAL25X200CA Is Used
Textile Loom Tensioning
Actuates a thread-guide arm on a weaving machine, utilizing the 245 N push force and CA pivot to accommodate the swinging arc of the loom carriage.
Bottling Line Diverter
Pushes glass bottles onto a secondary packaging lane, where the 200 mm stroke provides the exact reach needed to clear the main conveyor belt.
Carton Flap Folder
Folds corrugated cardboard flaps prior to tape sealing on a packaging line, relying on the self-lubricating bearing to handle rapid 30-800 mm/s cycling.
Replacing the Airtac B01-MAL Special Purpose Cylinder B01-MAL25X200CA with B01-MBL25X200CA
To replace this discontinued cylinder, order the MBL25X200CA. It drops in directly because the bore, 200 mm stroke, G1/8 port, PT thread, and CA pivot back cover all match exactly. Because this specific SKU lacks the -S magnet option, it cannot accept CS1-M or DS1-M sensors; if you need position detection on the new MBL, add the -S suffix and note that the modern equivalent uses CMSG, DMSG, or EMSG switches. The fixed rubber bumper on this unit cannot be adjusted; if your application requires adjustable end-cushioning, step up to the current-line MBLC variant.
For sizing flexibility, stepping down to a 20 mm bore drops the push force to 157 N at 0.5 MPa, while stepping up to a 32 mm bore increases it to 402 N. Since the 200 mm stroke is substantial for a 10 mm rod, side-load tolerance is low; use the CA clevis to allow arcing motion or add an external guide to prevent rod bending. Note that a plain double-acting cylinder drifts when air pressure is lost, so install a pilot-operated check valve if you need to hold a load mid-stroke.
Upgrade checklist
- ✓ Order the B01-MBL25X200CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the B01-MBL25X200CA instead of this discontinued model.
Airtac B01-MAL Special Purpose Cylinder B01-MAL25X200CA FAQ
Yes, the B01-MAL25X200CA is discontinued. The direct replacement is the MBL25X200CA, which matches the 25 mm bore, 200 mm stroke, 245 N push force, G1/8 port, and CA pivot. The "B01-" prefix simply designated an application-specific build of the standard MAL25X200CA, so the MBL replacement functions identically.
At 0.5 MPa, the push force is 245 N and the pull force is 206 N. At 0.7 MPa, the push force is 343 N, with a maximum theoretical force of 50 kgf at 1.0 MPa. Because this SKU does not have the -S magnet option, it cannot accept CS1-M or DS1-M position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The B01-MBL25X200CA replaces this model 1:1.
Fast Dispatch
MBL replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac B01-MAL Special Purpose Cylinder B01-MAL25X200CA → B01-MBL25X200CA)
Tell us the quantity and destination — we quote the direct B01-MBL25X200CA replacement with price, stock and lead time, usually within 7-8 hours.