This model is discontinued
AirTAC has phased out the MAL series. You can still order this code here: we ship the direct replacement B01-MBL25X260CA, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac B01-MAL Special Purpose Cylinder B01-MAL25X260CA
The AirTAC Airtac B01-MAL Special Purpose Cylinder B01-MAL25X260CA is a double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 260mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the direct replacement is the B01-MBL25X260CA, which matches its bore, stroke, force and mounting.
- BoreØ25 mm
- Stroke260 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B01-MBL25X260CA
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-MAL Special Purpose Cylinder B01-MAL25X260CA
The AirTAC B01-MAL25X260CA is a discontinued compact double-acting aluminum mini round cylinder. The "B01-" prefix marks this as an application-dedicated (customer-specified) variant of the base MAL25X260CA, meaning it is mechanically identical to the standard model. Delivering 245 N of push force at 0.5 MPa, it is replaced directly by the MBL25X260CA.
The legacy MAL body uses threaded front and back covers, whereas the current MBL replacement features a riveted rolling-packed body. Because this SKU lacks the -S magnet option, it cannot accept a position sensor. The CA pivot back cover is designed to swing on a pin, accommodating arcing motion rather than rigid restraint.
Airtac B01-MAL Special Purpose Cylinder B01-MAL25X260CA Technical Specifications
| Model | Airtac B01-MAL Special Purpose Cylinder B01-MAL25X260CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | B01-MBL25X260CA |
| Bore size | Ø25 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The B01-MBL25X260CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
The B01-MBL25X260CA produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B01-MAL Special Purpose Cylinder B01-MAL25X260CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×260 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac B01-MAL Special Purpose Cylinder B01-MAL25X260CA Is Used
Packaging Diverter Arm
Swings a lightweight routing gate on a packaging conveyor using the CA pivot to absorb arcing motion during box sorting.
Textile Yarn Guide
Cycles a yarn guide carriage across a 260 mm path, relying on the 245 N thrust to maintain tension in weaving machines.
Bin Lid Actuation
Pops open small parts bin lids in assembly cells, where the compact 25 mm bore fits tight clearances and the bumper prevents slamming.
Replacing the Airtac B01-MAL Special Purpose Cylinder B01-MAL25X260CA with B01-MBL25X260CA
To replace this discontinued cylinder, order the direct replacement MBL25X260CA. It matches the 25 mm bore, 260 mm stroke, G1/8 port, PT thread, and CA pivot back cover exactly. If you need a position sensor, you must select an MBL variant with the -S magnet, which pairs with the current CMSG / DMSG / EMSG switches rather than the older CS1-M / DS1-M sensors. If sizing down, the 20 mm bore offers 157 N push at 0.5 MPa; if stepping up, the 32 mm bore provides 402 N. The fixed rubber bumper softens end-of-stroke impacts, but for adjustable air cushioning, you need the MBLC series. At 260 mm stroke, the 10 mm rod is susceptible to bending under side loads, so utilize the CA clevis to self-align or add an external guide. This cylinder will drift if air pressure is lost, so add a rod lock for suspended loads.
Upgrade checklist
- ✓ Order the B01-MBL25X260CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the B01-MBL25X260CA instead of this discontinued model.
Airtac B01-MAL Special Purpose Cylinder B01-MAL25X260CA FAQ
Yes, the B01-MAL25X260CA is discontinued. The direct replacement is the MBL25X260CA, offering the same 25 mm bore, 260 mm stroke, G1/8 port, and CA pivot mounting. The B01- prefix simply denotes an application-dedicated variant of the base MAL model, and the MBL matches its mechanics entirely.
At 0.5 MPa, it provides 245 N push and 206 N pull force. At 0.7 MPa, push is 343 N, with a maximum theoretical force of 50 kgf at 1.0 MPa. Because this specific SKU lacks the -S magnet, it cannot accept a position sensor; if detection is needed, order an MBL with the -S option.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The B01-MBL25X260CA replaces this model 1:1.
Fast Dispatch
MBL replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac B01-MAL Special Purpose Cylinder B01-MAL25X260CA → B01-MBL25X260CA)
Tell us the quantity and destination — we quote the direct B01-MBL25X260CA replacement with price, stock and lead time, usually within 7-8 hours.