This model is discontinued
AirTAC has phased out the MAL series. You can still order this code here: we ship the direct replacement B05-MBL32X100S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X100S
The AirTAC B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X100S is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 100mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the direct replacement is the B05-MBL32X100S, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B05-MBL32X100S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X100S
The AirTAC B05-MAL32X100S is a discontinued double-acting aluminum mini round cylinder. The B05- prefix designates this as a robot and manipulator (pick-and-place) dedicated variant, though mechanically it is identical to the base MAL32X100S. It delivers 402 N of push force at 0.5 MPa and uses a G1/8 port with a Ø12 mm hard-chrome plated carbon-steel rod. AirTAC has ended this line, making the MBL32X100S the direct replacement.
The MBL successor shares the same 32 mm bore, 100 mm stroke, force output, and PT porting, but upgrades the threaded front and back covers to a riveted rolling-packed body. Because this SKU includes the -S magnet, note that the original CS1-M and DS1-M switches are retired; the MBL replacement requires the current CMSG, DMSG, or EMSG sensor families. The MAL relies on a fixed rubber bumper for end-of-stroke damping, whereas the newer MBLC line introduces an adjustable air cushion.
Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X100S Technical Specifications
| Model | Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X100S |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | B05-MBL32X100S |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The B05-MBL32X100S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The B05-MBL32X100S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X100S
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×100 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X100S Is Used
Pick-and-Place Chassis Transfer
Drives the horizontal 100 mm extension on a lightweight manipulator arm moving sheet-metal chassis between conveyor belts, utilizing the 402 N push force to maintain positive grip.
PCB Edge-Grip Ejection
Pushes populated printed circuit boards out of an SMT testing fixture, where the self-lubricating front-cover bearing guide prevents binding during high-speed 30-800 mm/s ejections.
Carton Flap Tucking
Actuates a short tucking blade on a robotic packaging cell to fold corrugated carton flaps, relying on the fixed rubber bumper to soften the 100 mm stroke endpoint without marking the cardboard.
Replacing the Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X100S with B05-MBL32X100S
To replace the B05-MAL32X100S, order the MBL32X100S. Confirm your 32 mm bore, 100 mm stroke, G1/8 port, and PT thread. The -S magnet carries over, but you must upgrade your sensors to CMSG, DMSG, or EMSG models. If your pick-and-place payload needs less force, step down to the 25 mm bore (245 N push at 0.5 MPa); if you need more clamping power, step up to the 40 mm bore (628 N push at 0.5 MPa, which also upgrades the port to G1/4). At 100 mm stroke, side-load risk is moderate, but the small 12 mm rod still demands careful alignment. The fixed rubber bumper is not a lock; if air pressure drops, the rod will drift and drop the payload. For position holding, install an external pilot-operated check valve. If end-of-stroke impact damages your manipulator, switch to the MBLC for adjustable air cushioning.
Upgrade checklist
- ✓ Order the B05-MBL32X100S (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the B05-MBL32X100S instead of this discontinued model.
Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X100S FAQ
Yes, the B05-MAL32X100S is discontinued. The direct replacement is the MBL32X100S, which matches the 32 mm bore, 100 mm stroke, G1/8 port, and mounting dimensions. The B05- prefix simply marked this as a pick-and-place robot variant, and the MBL retains full mechanical interchangeability. You must upgrade your -S magnet sensors from the old CS1-M/DS1-M to the new CMSG/DMSG/EMSG family.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force increases to 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa. The cylinder operates at 30-800 mm/s and uses a fixed rubber bumper, not an adjustable cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The B05-MBL32X100S replaces this model 1:1.
Fast Dispatch
MBL replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X100S → B05-MBL32X100S)
Tell us the quantity and destination — we quote the direct B05-MBL32X100S replacement with price, stock and lead time, usually within 7-8 hours.