This model is discontinued
AirTAC has phased out the MAL series. You can still order this code here: we ship the direct replacement B05-MBL32X60S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X60S
The AirTAC B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X60S is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the direct replacement is the B05-MBL32X60S, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B05-MBL32X60S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X60S
The AirTAC B05-MAL32X60S is a discontinued double-acting aluminum mini round cylinder. The B05- prefix marks it as a robot and manipulator pick-and-place dedicated variant, though mechanically it is identical to the base MAL32X60S. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa. AirTAC replaced this legacy series with the MBL32X60S, a direct alternative retaining the exact 32 mm bore, 60 mm stroke, G1/8 port, and mounting interface.
This 32 mm bore unit uses a 12 mm carbon-steel rod with 20 um hard-chrome plating guided by a self-lubricating front-cover bearing. The original MAL body featured threaded front and back covers, whereas the MBL replacement utilizes a riveted rolling-packed body. Because this SKU includes the -S magnet, it supports position detection via the legacy CS1-M or DS1-M switches; upgrading to the MBL requires switching to the current CMSG, DMSG, or EMSG sensor family.
Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X60S Technical Specifications
| Model | Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X60S |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | B05-MBL32X60S |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The B05-MBL32X60S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The B05-MBL32X60S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X60S
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×60 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X60S Is Used
Pick-and-Place Robot Arms
Drives the vertical Z-axis on Cartesian manipulators for electronic PCB board handling, using the 402 N push force to overcome gripper weight and friction.
Packaging Line Diverters
Actuates small pneumatic pushers at bagging stations, where the 60 mm stroke quickly sorts lightweight cartons without delaying the belt.
Semiconductor Wafer Sorting
Moves silicon wafers between cassettes, relying on the 12 mm hard-chrome rod and self-lubricating bearing for smooth, low-friction transfer.
Replacing the Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X60S with B05-MBL32X60S
To replace the B05-MAL32X60S, order the MBL32X60S. Confirm your 60 mm stroke, G1/8 port, and PT thread form. The -S magnet means you must swap older CS1-M/DS1-M switches for CMSG/DMSG/EMSG sensors on the new body. If your pick-and-place payload needs less force, step down to the 25 mm bore (245 N push @0.5 MPa); if you need more gripping power, step up to the 40 mm bore (628 N push @0.5 MPa, noting its larger G1/4 port). The MAL uses a fixed rubber bumper, so if your robotic cycle demands adjustable end-cushioning, specify the MBLC variant on the current line. A plain cylinder drifts when air is lost, so fit an external pilot-operated check valve if the manipulator arm must hold position during an outage.
Upgrade checklist
- ✓ Order the B05-MBL32X60S (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the B05-MBL32X60S instead of this discontinued model.
Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X60S FAQ
Yes, the B05-MAL32X60S is discontinued. The direct replacement is the MBL32X60S, which matches the 32 mm bore, 60 mm stroke, force, and G1/8 port. The B05- prefix simply designated it for manipulator use; the MBL32X60S serves as the direct functional successor.
At 0.5 MPa it provides 402 N push and 346 N pull; at 0.7 MPa it provides 563 N push, with a maximum theoretical force of 82 kgf at 1.0 MPa. Because this SKU has the -S magnet, it uses older CS1-M or DS1-M switches; the MBL replacement requires CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The B05-MBL32X60S replaces this model 1:1.
Fast Dispatch
MBL replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL32X60S → B05-MBL32X60S)
Tell us the quantity and destination — we quote the direct B05-MBL32X60S replacement with price, stock and lead time, usually within 7-8 hours.