Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X10SCM
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X10SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 10mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke10 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X10SCM
The MAC16X10SCM packs double-acting power with a variable air cushion at both ends into a 16 mm stainless round barrel. At 0.5 MPa it pushes with 100.5 N and pulls 86.4 N, so a 10 mm stroke covers quick ejection or clamping of small parts in tight spots. Aluminium-alloy covers are riveted onto the tube, giving a sealed rolling-packed body.
Because the barrel is stainless steel and the 6 mm rod is hard-chrome plated carbon steel, the cylinder shrugs off washdown and damp shop air that dulls painted minis. Working to about 60 N instead of the full 0.5 MPa rating leaves margin for friction and pressure dip. The built-in magnet is standard, so CMSG, DMSG or EMSG switches clip straight on without a special piston.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X10SCM Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X10SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 10 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X10SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X10SCM Is Used
Bench press ejector
Ejects finished bushings from a small assembly die on a 10 mm throw, using the 100.5 N push at 0.5 MPa.
Vial push-off
Knocks filled 2 ml vials off a lab filling rail; the short 10 mm stroke keeps cycle time low at up to 800 mm/s.
Enclosure latch
Snaps a compact control-cabinet door latch closed, with the variable cushion absorbing the snap at end of stroke.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X10SCM the Right Cylinder?
At bore 16 this is the smallest MAC; if your load needs more, step up to a 20 mm bore for 157.0 N push and 131.9 N pull at 0.5 MPa, or 25 mm for 245.3 N. Pressure runs 0.15-1.0 MPa (22-145 psi) at 30-800 mm/s. Air escapes both ports when the valve centres, so the rod drifts under load unless you add a pilot check or rod lock. The CM round-end cover takes a pivot pin directly; FA flange, LB foot or SDB pivot brackets bolt on when a fixed mount suits better.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X10SCM FAQ
At 0.5 MPa it pushes 100.5 N and pulls 86.4 N; at 0.7 MPa push rises to 140.7 N and pull to 120.9 N. The theoretical ceiling is 20.5 kgf at 1.0 MPa. The 6 mm rod carries an M6x1.0 male thread and the ports are M5x0.8.
The magnet comes built in as standard, so a CMSG or EMSG switch drops onto the barrel without a special-order piston. The CM round-end back cover lets you pin a pivot mount straight to the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X10SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.