Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X10SU
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X10SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 10mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke10 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X10SU
A stainless round tube, riveted aluminium covers and a hard-chrome plated 6 mm rod give the MAC16X10SU a body that tolerates coolant mist, splash and outdoor damp far better than painted mini cylinders. It is double acting with a variable air cushion at each end, running on 0.15-1.0 MPa (22-145 psi).
The variable cushion at both ends soaks up end-of-stroke shock, letting you run the 10 mm stroke fast without hammering the covers.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X10SU Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X10SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 10 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X10SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (double rod, adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X10SU Is Used
Micro conveyor stop
Stops and indexes small totes on a light conveyor line; the 10 mm stroke acts as a positive stop backed by 100.5 N.
Sampler actuator
Drives a dip-sampler arm in a coolant test rig where the stainless construction resists constant splashing.
Fixture clamp
Clamps thin sheet-metal brackets in a welding jig; cushioning prevents the clamp from ringing the fixture.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X10SU the Right Cylinder?
Need more muscle than 100.5 N at 0.5 MPa? A 20 mm bore delivers 157.0 N push and 131.9 N pull, while 25 mm reaches 245.3 N. Because this is double acting with no spring, the rod settles wherever air leaves it - add a rod lock or pilot check valve if the load must stay put when pressure drops. The U flat-end cover gives a clean fixed face for direct bolting; SDB pivot, LB foot or FA flange brackets are available.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X10SU FAQ
Push force is 100.5 N and pull 86.4 N at 0.5 MPa. Raise supply to 0.7 MPa and those become 140.7 N push and 120.9 N pull, topping out at 20.5 kgf theoretical at 1.0 MPa. Ports are M5x0.8 and the rod thread is M6x1.0.
Both ends carry a variable air cushion. Back the needle screws fully off before first run, then close them gradually until the 10 mm stroke ends quietly; travel speed can be tuned anywhere from 30-800 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X10SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.