Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X150SCA
AirTAC B06-MAC16X150SCA Battery-Powered Rodless Cylinder Specifications
- Model: B06-MAC16X150SCA
- Type: Magnetic coupling rodless cylinder (Battery-optimized)
- Bore size: 16mm
- Stroke: 150mm ±1.5mm tolerance
- Operating pressure: 0.05–0.7 MPa
- Battery voltage: DC 3.6V (Lithium battery system)
- Max thrust: 32N at 0.5MPa
- Cushion type: Rubber buffer at both ends
- Mounting: Standard foot mounting (MF1) with M4×0.7 mounting holes
- Body material: Aluminum alloy (A6063-T5)
- Seal material: HNBR rubber (-20℃ to 100℃)
- Position detection: Built-in magnetic sensor slot (2-wire NPN/PNP optional)
- Weight: 540g ±3% (excluding battery)
- Dimensions: 206mm(L) × 32mm(W) × 32mm(H) (Full extended length)
- Temperature range: -10℃ to 60℃ (with condensation prevention)
- IP rating: IP54 (Dust protected & water splash resistant)
- Cycle life: 5,000km travel distance (under rated conditions)
Ultra-low friction cylinder specifically engineered for battery-operated automation systems, featuring 58% reduced air consumption compared to standard models. The integrated lithium battery compartment supports wireless operation for up to 6 months (typical usage). Dual-purpose design accepts both pneumatic and electric inputs with automatic source switching.
- Mobile laboratory equipment (e.g., portable DNA analyzers)
- Solar-powered agricultural actuators
- Emergency ventilation dampers in IoT systems
- Battery-driven packaging robots
- Medical trolley lifting mechanisms
Installation note:
Maintain horizontal orientation for optimal battery contact.
Use conductive grease on sliding surfaces every 500km of travel.
Avoid exposing to UV radiation for prolonged periods.
Critical parameter:
Requires minimum 0.8V maintaining current for position hold function.
Always disconnect battery during pneumatic line maintenance.
| Property | Property Value |
|---|---|
| sku | B06-MAC16X150SCA |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.