Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X200SU
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X200SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 200mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke200 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X200SU
Plate-mount simplicity defines the MAC16X200SU: a flat U back cover on a 16 mm bore with a 200 mm stroke. Air drives the rod in both directions - 100.5 N push and 86.4 N pull at 0.5 MPa, up to 140.7 N at 0.7 MPa - while needle screws tune the variable air cushion at each end for soft, repeatable stops.
The stainless round barrel resists corrosion in humid, washdown-adjacent corners where painted minis fail, running on 0.15-1.0 MPa (22-145 psi) of air filtered to 40 um. Because the magnet is standard, CMSG, DMSG or EMSG switches snap on for end-of-stroke sensing. Budget about 60 N of real working force at 0.5 MPa; that equates to lifting roughly 5 kg vertically with a 2:1 margin.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X200SU Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X200SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 200 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X200SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X200SU Is Used
Lane stopper on a parts flow rack
Blocks gravity-fed bins at a pick face; the flat U cover bolts to the rack upright and 100.5 N holds back light totes on the 0.5 MPa line.
Syringe plunger driver on a test rig
Depresses a 20 ml syringe for viscosity sampling; the 6 mm hard-chrome rod suits the light 60 N-class working load and the cushion smooths the touch-off.
Tray ejector on an SMT magazine loader
Pushes one magazine tray to the takeaway conveyor; the 200 mm stroke matches pocket pitch travel and CMSG sensing confirms full ejection.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X200SU the Right Cylinder?
Sixteen millimetres is the smallest bore AirTAC makes in this round-body family, and the next size up, 20 mm, delivers 157 N of push at 0.5 MPa if loads grow. A 200 mm stroke magnifies any misalignment, so guide the load externally to protect the slender 6 mm rod. When supply air or the valve centre drops, the piston is free to move - fit a rod lock or pilot check valve where position must persist. The U flat end screws straight to plates and brackets; FA flange and LB foot versions exist for other faces, and PT, G or NPT threads can be specified.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X200SU FAQ
At 0.5 MPa: 100.5 N push and 86.4 N pull. At 0.7 MPa: 140.7 N push and 120.9 N pull, with a theoretical maximum of 20.5 kgf at 1.0 MPa. Run it on 0.15-1.0 MPa (22-145 psi) of air filtered to 40 um; proof pressure is 1.5 MPa (215 psi) and speed range is 30-800 mm/s.
The 16 mm bore uses M5x0.8 ports and an M6x1.0 male rod thread; PT comes standard with G and NPT selectable. The U flat-end cover bolts straight to plates, and the built-in magnet is ready for CMSG, DMSG or EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X200SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.