Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X225SCM
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X225SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 225mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke225 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X225SCM
With air working both sides of the piston, the MAC16X225SCM extends and retracts under power across its 225 mm stroke, and a variable air cushion at each end lets you dial out impact on the covers. This 16 mm bore delivers 100.5 N of push and 86.4 N of pull at 0.5 MPa, topping out at 140.7 N push when you raise supply to 0.7 MPa. Speeds from 30 to 800 mm/s suit quick index moves.
Build quality is where this mini earns its keep: a stainless-steel barrel, a hard-chrome plated rod and riveted aluminium covers stand up to washdown and humidity that blister painted minis. The CM round-end back cover accepts a pivot pin without extra brackets. Keep real workload near 60 N of push at 0.5 MPa - that is the comfortable figure once friction and pressure dips are allowed for, and it lifts about 5 kg vertically with a 2:1 margin. The built-in magnet is standard, so CMSG, DMSG or EMSG switches clip on with no special-order piston.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X225SCM Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X225SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 225 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X225SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X225SCM Is Used
Carton lane ejector
A side-mounted MAC16X225SCM sweeps single cartons off a 200 mm benchtop conveyor lane at the packaging station's diverter.
Pouch sealer jaw release
The 225 mm stroke reaches across the sealer frame to lift the locking latch on the jaw arm before the operator loads the next pouch.
Autosampler slide index
In an analytical autosampler, the cylinder advances a sample tray one position per cycle, with the cushion keeping each stop gentle.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X225SCM the Right Cylinder?
Bore 16 is the smallest in the MA range, so if 100.5 N of push at 0.5 MPa feels tight, step up to a MAC20X225 at 157 N or a MAC25X225 at 245.3 N. Operating pressure spans 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof. Note that when air is removed or the valve centres, the rod drifts freely - add a pilot check valve or rod lock if the load must stay put. Port is M5x0.8 and the rod thread is M6x1.0; the CM round-end cover plus FA flange, LB foot or SDB pivot brackets cover most frame layouts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X225SCM FAQ
At 0.5 MPa the piston pushes 100.5 N and pulls 86.4 N; at 0.7 MPa those rise to 140.7 N push and 120.9 N pull. The theoretical maximum for this bore is 20.5 kgf at 1.0 MPa. The rod is 6 mm with an M6x1.0 thread and the port is M5x0.8.
The MAC16X225SCM uses a variable air cushion at both ends, not a fixed bumper. On first run, back both cushion needles fully off, cycle the cylinder, then close them in small steps until the end-of-stroke impact disappears. Keep the speed within 30-800 mm/s while tuning.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X225SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.