Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X225SU
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X225SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 225mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke225 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X225SU
A 16 mm barrel driving a 6 mm rod over 225 mm gives the MAC16X225SU a long reach for tight spaces, with double-acting power in both directions and a variable air cushion at each end to absorb the stop. Expect 100.5 N of push and 86.4 N of pull at 0.5 MPa, climbing to 140.7 N at 0.7 MPa, at cycle speeds anywhere between 30 and 800 mm/s.
The flat U back cover bolts flush against a machine face, so no clevis hardware is needed for fixed mounts. Inside, the two-way piston seal doubles as a grease reservoir, and the stainless barrel with its hard-chrome plated rod shrugs off splash and condensation that ruin painted minis. Usable push at 0.5 MPa sits near 60 N once friction and supply dips are allowed for - enough to lift about 5 kg vertically on a 2:1 margin. For positioning feedback, the standard magnet works with CMSG, DMSG and EMSG switches.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X225SU Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X225SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 225 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X225SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X225SU Is Used
Photoeye flag driver
Mounted beside a bottling line gutter, the cylinder swings a stainless flag through the photoelectric sensor beam to confirm bottle spacing.
Coffee cart brace latch
A mobile coffee cart uses the 225 mm rod travel to lock its folding service shelf, the flat U cover sitting flush on the cart frame.
Paint skid valve toggle
On a two-component paint dosing skid, the rod flips a small ball valve between draw and dispense positions each cycle.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X225SU the Right Cylinder?
Compare bore sizes by thrust: moving up one size to a MAC20X225 lifts push force to 157 N at 0.5 MPa, while the 16 mm tube suits confined frames. Supply 0.15-1.0 MPa (22-145 psi); proof is 1.5 MPa (215 psi). Because this is a plain double-acting cylinder, the rod sags or drifts the moment air is vented, so fit a rod lock or pilot check valve for held positions. The U flat-end cover pairs naturally with LB foot or FA flange brackets, and the M5x0.8 port keeps plumbing compact.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X225SU FAQ
Bore 16 produces 100.5 N push and 86.4 N pull at 0.5 MPa, or 140.7 N push and 120.9 N pull at 0.7 MPa, with a theoretical peak of 20.5 kgf at 1.0 MPa. The 6 mm rod carries an M6x1.0 thread and air connects through the M5x0.8 port.
The stainless tube plus 20 um hard-chrome plating on the carbon-steel rod resists washdown, condensation and mild chemicals, while the rolled-on aluminium covers keep the body sealed. Painted minis tend to corrode at the tube in the same damp, food or outdoor settings.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X225SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.