Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X250SCM
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X250SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 250mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke250 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X250SCM
The CM round-end back cover on the MAC16X250SCM gives assemblers a clean pivot point that sits inside a matching clevis or U-bracket, on a barrel spanning 250 mm of stroke at just 16 mm bore. Double-acting operation means air pushes the rod out and pulls it back, with a variable cushion at each end to soften arrival. At 0.5 MPa the piston delivers 100.5 N of push and 86.4 N of pull; raise supply to 0.7 MPa and push reaches 140.7 N.
The body is a stainless tube with rolled-on aluminium covers and a hard-chrome plated rod, a combination that tolerates washdown and outdoor dust where coated minis fail. Count on close to 60 N of practical push at 0.5 MPa - call it a 5 kg vertical lift with a 2:1 margin. The built-in magnet needs no ordering decision: CMSG, DMSG and EMSG switches fit straight from the box.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X250SCM Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X250SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 250 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X250SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X250SCM Is Used
Craft brewery cap press
Above the filler bowl of a small brewery line, the cylinder presses crowns onto bottles with a cushioned final approach.
Pill counter lane divider
A rotating divider blade on a pill counting machine changes lane, driven by the 250 mm rod travel between two sensor stops.
Label unwind tension arm
The cylinder counterbalances the tension arm of a label unwind stand, easing web tension changes without hand adjustment.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X250SCM the Right Cylinder?
Thrust scales with bore: if 100.5 N of push at 0.5 MPa leaves no margin, the next size up, MAC20X250, returns 157 N, and a MAC25X250 reaches 245.3 N. Run the cylinder on 0.15-1.0 MPa (22-145 psi), proof tested to 1.5 MPa (215 psi). Remember the rod is free to move whenever supply pressure drops or the valve sits mid-position; a pilot check valve or rod lock holds the load instead. Mounting flexibility covers FA flange, LB foot and SDB pivot brackets plus I or Y rod knuckles, with M5x0.8 ports and an M6x1.0 rod thread.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X250SCM FAQ
Push force is 100.5 N and pull force 86.4 N at 0.5 MPa; at 0.7 MPa you get 140.7 N push and 120.9 N pull. Theoretical maximum for the bore is 20.5 kgf at 1.0 MPa. Air ports are M5x0.8, rod thread is M6x1.0 on the 6 mm rod, and stroke speed runs 30-800 mm/s.
The round end is made to ride in a clevis or pivot bracket for swinging linkages. Where a fixed mount is preferred, add the FA flange, LB foot or SDB pivot bracket, and use an I or Y rod knuckle on the M6x1.0 thread to connect the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X250SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.