Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X25SCM
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X25SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 25mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke25 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X25SCM
The CM round-end back cover turns this 16 mm bore MAC into a pin-mounted actuator: drop a clevis pin through the cover eye and the cylinder swings freely with the linkage. Stroke is a quick 25 mm, push is 100.5 N and pull 86.4 N at 0.5 MPa, and the double-acting piston carries a variable air cushion at both ends to soften the last millimetres. Air quality is simple - filtered to 40 um, pressure 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s.
Halving the 10 kg-equivalent push rating gives roughly 5 kg of vertical lift at a comfortable 2:1 margin, plenty for raising a small inspection camera head. The stainless rolled barrel and hard-chrome plated rod shake off splash and humidity that would pit an aluminium mini, and the built-in magnet means CMSG / DMSG / EMSG switches bolt straight on. Back the cushion needles fully off before first pressurisation.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X25SCM Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X25SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 25 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X25SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X25SCM Is Used
Rotary table detent lever
A compact rotary indexing table releases its detent through a swinging lever pinned to the CM eye; 86.4 N of pull at 0.5 MPa retracts it cleanly.
Inspection camera lift
A gantry-mounted inspection camera head of about 5 kg is lifted with a 2:1 margin on the bore's 10 kg-equivalent push rating at 0.5 MPa.
Micro-dosing guide arm
A benchtop filler guide arm dips a syringe barrel a fixed 25 mm; the round-end pivot follows the arm arc without binding.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X25SCM the Right Cylinder?
Compare before you commit: the 20 mm bore offers 157 N and the 25 mm bore 245.3 N of push at 0.5 MPa if the linkage meets real resistance. A plain MAC cannot park its load when the valve centres, so fit a pilot check valve wherever the linkage must hold position through a pressure drop. The CM eye suits a swinging link; the U flat-end cover or an FA flange, LB foot or SDB pivot bracket covers fixed mounting.
With only 25 mm of travel, rod bending is unlikely, yet keeping the load aligned with the 6 mm rod still pays off in seal life. Sensor feedback is built in via the standard piston magnet - no special-order piston required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X25SCM FAQ
Figures for the 16 mm bore: 100.5 N push and 86.4 N pull at 0.5 MPa, 140.7 N push and 120.9 N pull at 0.7 MPa, and a 20.5 kgf theoretical maximum at 1.0 MPa. Ports are M5x0.8; the 6 mm rod carries an M6x1.0 thread.
The round barrel is high-precision stainless steel with aluminium-alloy covers rolled and riveted onto it, and the 6 mm rod is carbon steel plated with 20 um of hard chrome. Mild splash, humidity and light washdown that pit painted mini cylinders are handled without rust-through, though aggressive chemical cleaning is outside its scope.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X25SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.