Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X300SU
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X300SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 300mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke300 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X300SU
A riveted stainless body, 20 um chrome-plated rod and 300 mm of travel make the MAC16X300SU a corrosion-ready choice for damp or outdoor cells. Double acting with a variable air cushion at both ends, it outputs 100.5 N at 0.5 MPa and 140.7 N at 0.7 MPa on a 16 mm bore with an M5x0.8 port.
The flat-end U back cover bolts to fixed fixtures without adapters, while LB foot or SDB pivot mounts bolt on when the layout changes. Treat about 60 N as the practical workload - that halves to roughly 5 kg of vertical lift with a 2:1 margin - and the standard magnet picks up CMSG / DMSG / EMSG switches for position feedback.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X300SU Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X300SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 300 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X300SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X300SU Is Used
PCB stop bracket on an SMT unload conveyor
The U flat-end face bolts flush to the conveyor rail; 100.5 N at 0.5 MPa stops lightweight boards dead across the 300 mm slide.
Lightweight inspection camera riser
Rated to raise about 5 kg vertically at a 2:1 margin, the rod lifts a small camera head while the magnet feeds position data to the PLC.
Greenhouse louvre arm
Outdoors, the stainless barrel outlasts painted minis; the 30-800 mm/s speed range opens vents gently on a temperature signal.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X300SU the Right Cylinder?
Compare forces before you commit: 100.5 N push at 0.5 MPa here, versus 157 N from a 20 mm bore and 245.3 N from a 25 mm bore - there is no smaller MA bore, so throttle or regulate to soften excess. When air is dropped the rod is free to move, so a pilot check valve or rod lock is the fix for loads that must hold over 300 mm. Keep side load off the 6 mm rod with an external guide on this stroke length, and use the flat-end U cover where a fixed face mount beats a pivot; SDB and LB brackets cover other layouts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X300SU FAQ
Expect 100.5 N forward and 86.4 N return at 0.5 MPa, 140.7 N and 120.9 N at 0.7 MPa, and about 20.5 kgf theoretical peak at 1.0 MPa. Porting is a single M5x0.8 on the cover; the male rod thread measures M6x1.0.
The rolled stainless barrel and 20 um hard-chrome plated rod resist mild corrosion and washdown, an edge over painted minis in food, damp or outdoor spots. There are no tie rods to loosen either, and the riveted construction keeps its seal through -20 to +70 C temperature swings.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X300SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.