Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X350SCM
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X350SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 350mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke350 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X350SCM
Where a slim 350 mm stroke needs to hang from a pivot, this 16 mm bore MAC pairs the CM round-end cover with the full 500 mm standard stroke range of the bore. It is double acting with a variable air cushion at both ends, pushing 100.5 N and pulling 86.4 N at 0.5 MPa, up to 140.7 N and 120.9 N at 0.7 MPa (20.5 kgf theoretical). Work around 60 N of real load for a dependable service life.
Grease-storing two-way piston seals keep the stainless barrel and hard-chrome plated rod running smoothly across the 30-800 mm/s speed band. Because the magnet is built in as standard rather than a paid option, adding CMSG / DMSG / EMSG switches for mid-stroke or end detection costs nothing extra on the piston. The riveted construction seals the barrel against light washdown, an advantage over painted minis in humid corners.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X350SCM Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X350SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 350 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X350SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X350SCM Is Used
Shuttle stop gate
Dropping a stop gate across a gravity roller spur in a storeroom; the pivot-ready round-end cover lets the gate swing down out of the product path.
Slide extension
Extending a sliding jig plate 350 mm on a workshop bench; keep the load carried on rails, since the 6 mm rod resists little side load on its own.
Battery bay interlock
Blocking a battery-change bay gate at an electric forklift charging station; if the gate must stay shut with air off, add a pilot check valve because the rod will drift.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X350SCM the Right Cylinder?
No bore sits below 16 mm in this range, so 100.5 N at 0.5 MPa is the lightest push available; the next step up is the 20 mm bore at 157.0 N. Long strokes amplify any misalignment - keep the rod straight and the load guided, since a 6 mm rod over 350 mm tolerates little side load. A plain MAC will not park a load when air is lost; specify a rod lock or pilot check valve. The CM round end suits clevis-style pivots, with FA flange and LB foot options for rigid frames.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X350SCM FAQ
Push at 0.5 MPa is 100.5 N and pull 86.4 N; at 0.7 MPa it is 140.7 N push and 120.9 N pull; the theoretical ceiling at 1.0 MPa is 20.5 kgf. Pressure runs 0.15-1.0 MPa (22-145 psi), proof pressure is 1.5 MPa (215 psi), and both ends carry a variable air cushion.
The magnet is built in as standard on every MAC, so CMSG / DMSG / EMSG switches mount without ordering a special piston. The rod itself does not hold position: when air is lost or the valve centres, the piston drifts, so fit a rod lock or pilot check valve if the load must stay put.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X350SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.