Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X350SU
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X350SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 350mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke350 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X350SU
At the bottom of the MA force ladder, this 16 mm bore MAC still manages 100.5 N of push and 86.4 N of pull at 0.5 MPa, rising to 140.7 N at 0.7 MPa. It is double acting with a variable air cushion at both ends, so a light 350 mm transfer stroke can be slowed gently instead of hammering the flat-end U cover. The 6 mm hard-chrome rod runs inside a riveted stainless barrel rated for 0.15-1.0 MPa (22-145 psi) and 30-800 mm/s.
Because the magnet is built in as standard, CMSG or DMSG switches clip straight onto the barrel for end-of-stroke confirmation. Keep clear of the rating limit and you still have about 60 N of real working force at 0.5 MPa - plenty for ejecting small parts or tipping light flaps. Air ports are M5x0.8 and the rod thread is M6x1.0.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X350SU Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X350SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 350 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X350SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X350SU Is Used
Sample vial indexing
Slides a rack of test tubes one position per cycle on a diagnostic analyser; about 60 N of practical force is ample for light plastics, and the magnet-driven switch confirms each stop.
Light flap gate on a conveyor
Deflects small parts off a packaging line sort chute; the variable cushion keeps the 350 mm travel quiet at the end of each deflection.
Test-rig probe advance
Positions an inspection probe into a fixture; M5x0.8 ports make the air plumbing compact inside a tight instrument cabinet.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X350SU the Right Cylinder?
This is the smallest MA bore; step up to the 20 mm size (157.0 N push at 0.5 MPa) if loads creep upward. With no air applied the piston drifts freely, so a vertical or held load needs a rod lock or pilot check valve downstream. The 350 mm stroke on a 6 mm rod is long for its size - keep side load off the rod and guide the work externally. The flat-end U cover suits a fixed face mount, with LB foot or FA flange brackets available if the layout needs them.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X350SU FAQ
The 16 mm bore pushes 100.5 N and pulls 86.4 N at 0.5 MPa; at 0.7 MPa that rises to 140.7 N push and 120.9 N pull, with a theoretical maximum of 20.5 kgf at 1.0 MPa. Stroke is 350 mm, within the 500 mm standard limit, running at 30-800 mm/s on 0.15-1.0 MPa (22-145 psi) air.
The U back cover gives a flat fixed face for direct bolting to a machine plate without an extra pivot bracket. The stainless round barrel shrugs off washdown and mild corrosion better than painted minis, and the standard magnet accepts CMSG / DMSG / EMSG switches out of the box.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X350SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.