Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X400SU
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X400SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 400mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke400 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X400SU
Round stainless barrel, 400 mm of stroke and a flat-end U cover define this MAC. Double acting with an adjustable air cushion both ends, the 16 mm bore develops 100.5 N of push at 0.5 MPa - about 60 N of that is a sensible working figure - and 140.7 N once supply pressure reaches 0.7 MPa.
The riveted aluminium covers and stainless tube form a sealed round body that copes with splash and condensation, and the built-in magnet is standard, so a CMSG or DMSG switch drops on for stroke feedback. Ports are M5x0.8, rod thread M6x1.0, pressure 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X400SU Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X400SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 400 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X400SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (double rod, adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X400SU Is Used
Label press-roller positioning
Pushes a small idler roller against moving labels on a bottling line; about 60 N of practical force gives even, gentle contact.
Incubator door pusher
Cracks open a compact incubator door at cycle end; the stainless build tolerates the humid chamber atmosphere without rusting.
Fixture shuttle on an electronics test bench
Slides loaded fixtures 400 mm between test and unload stations; the adjustable cushion lands each shuttle without a jolt.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X400SU the Right Cylinder?
If your load needs more than about 60 N of working force, the 20 mm MAC delivers 157.0 N at 0.5 MPa. Remember this double-acting cylinder does not lock: with the valve centred the piston drifts, so use a pilot check valve or rod lock to park a load. For the long 400 mm stroke, align the load to the 6 mm rod or add external guides. The U cover bolts flat to a plate; an SDB pivot bracket covers applications that need a swing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X400SU FAQ
Push is 100.5 N and pull 86.4 N at 0.5 MPa; at 0.7 MPa expect 140.7 N push and 120.9 N pull; theoretical maximum is 20.5 kgf at 1.0 MPa. Stroke is 400 mm (standard up to 500 mm), pressure 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s, with M5x0.8 ports.
Back the cushion needle screws fully off before the first stroke, then close them gradually until the end-of-stroke bump disappears. Because the cushion is variable at both ends, you can tune each direction separately - useful when extending into a stop but retracting into free air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X400SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.