Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X450SCM
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X450SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 450mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke450 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X450SCM
A double-acting mini cylinder with a variable air cushion at each end, the MAC16X450SCM pairs a 450 mm stroke with a riveted stainless barrel that shrugs off washdown and outdoor damp better than painted-steel minis. At 0.5 MPa it pushes 100.5 N and pulls 86.4 N - roughly 10 kg of vertical lift at full flow, but plan for about 60 N of real work at 0.5 MPa instead of the full rating.
The round-end CM back cover gives a clean pivoting attachment without extra brackets, and the built-in magnet is standard, so CMSG, DMSG or EMSG switches clip on directly. Speed runs 30-800 mm/s across 0.15-1.0 MPa (22-145 psi); the 6 mm rod suits light loads on this long stroke.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X450SCM Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X450SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 450 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X450SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X450SCM Is Used
Lab reagent dosing slide
Long 450 mm travel pushes sample trays between fill and capping stations on a compact benchtop analyser.
Bakery-line gate diverter
Washdown-safe stainless barrel and about 60 N of usable push at 0.5 MPa suit a lightweight product pusher on a bread tray conveyor.
Small-parts ejection
The round-end CM cover pivots on a bracket to kick machined bushings off a finishing fixture.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X450SCM the Right Cylinder?
Bore 16 is the smallest in the MA family, so there is no step down - if 100.5 N at 0.5 MPa falls short of your load, move to the 20 mm bore (157 N push). The MAC does not hold position when air is removed: the piston drifts, so fit a pilot check valve or rod lock if the load must stay put. Ports are M5x0.8 and the rod thread is M6x1.0.
On a 450 mm stroke the slender 6 mm rod is exposed to bending - guide the load or keep side forces near zero. FA flange, LB foot or SDB pivot brackets bolt on if the CM round-end cover alone does not match the frame.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X450SCM FAQ
At 0.5 MPa it pushes 100.5 N and pulls 86.4 N; at 0.7 MPa the figures rise to 140.7 N push and 120.9 N pull. Theoretical maximum is 20.5 kgf at 1.0 MPa. Double acting with a variable cushion both ends, 30-800 mm/s, M5x0.8 ports.
No. Every MAC16X450SCM ships with the piston magnet already fitted, so CMSG, DMSG or EMSG sensors mount on the stainless barrel without a special-order piston. The CM round-end back cover plus FA, LB or SDB brackets cover most mounting needs.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X450SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.