Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X500SCM
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X500SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 500mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke500 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X500SCM
Long travel and corrosion protection in one package: the MAC16X500SCM runs a 500 mm stroke from a riveted stainless round barrel with a 20 um hard-chrome rod, so it shrugs off washdown and outdoor humidity. Air drives the rod both ways - push 100.5 N, pull 86.4 N at 0.5 MPa - with a variable cushion at each end.
Theoretical peak is 20.5 kgf at 1.0 MPa, but for real work budget about 60 N at 0.5 MPa. The round-end CM back cover gives a neat pivot point, FA flange, LB foot and SDB pivot brackets are available, and the standard magnet lets CMSG, DMSG or EMSG switches report position anywhere along the travel.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X500SCM Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X500SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 500 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X500SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X500SCM Is Used
AGV dock latch
Slides a latch bar across AGV charging docks; the stainless body survives yard dust and rain season after season.
Roll spreader
Opens the web-guiding roll gap on a film slitter, cushioning the full 500 mm travel at both ends.
Guard door interlock
Pins a machine-guard door shut on a packaging cell; about 60 N of working push at 0.5 MPa is ample for a light latch.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X500SCM the Right Cylinder?
When 100.5 N at 0.5 MPa is marginal, jump to bore 20 and gain 157 N; there is nothing smaller than 16 mm in this family. The cushion slows the rod near the covers but never locks it - if the load must hang or hold, add a rod lock or pilot check valve. With 500 mm of slender 6 mm rod exposed, keep the load guided and side forces low.
Connections are M5x0.8, PT as standard with G and NPT choices, and the rod thread is M6x1.0.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X500SCM FAQ
Push 100.5 N, pull 86.4 N at 0.5 MPa; push 140.7 N, pull 120.9 N at 0.7 MPa; 20.5 kgf theoretical maximum at 1.0 MPa. Speed 30-800 mm/s over 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), M5x0.8 ports.
The barrel is high-precision stainless steel rolled onto aluminium covers, and the 6 mm carbon-steel rod carries a 20 um hard-chrome plating. That combination resists rust in damp, food-wash or outdoor settings where painted mini cylinders pit. It is a riveted round-body design, not a tie-rod construction.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X500SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.