Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X50SCM
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X50SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 50mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke50 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X50SCM
A round-end CM back cover gives this 16 mm MAC a smooth, bracket-friendly rear face that suits clamp collars and shop-made pivots. It is double acting - air extends and retracts the rod - and delivers 100.5 N of push at 0.5 MPa with a variable air cushion at each end to soften landings.
Inside, a two-way heterogeneous seal that stores grease keeps friction low over millions of cycles, while the stainless tube and hard-chrome plated rod shake off coolant mist and humidity in packaging and machine-tool cells. Bores 16-63 mm share this construction, so you can scale the same platform as machines grow. Expect roughly 60 N of usable push at 0.5 MPa once friction is accounted for, and match that figure to your true load rather than the headline rating.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X50SCM Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X50SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 50 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X50SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X50SCM Is Used
Carton flap tucker on a shrink wrapper
Folds minor flaps ahead of sealing; the corrosion-resistant barrel suits humid heat-seal stations.
Tool slide on a small drilling jig
Advances a drill guide bush 50 mm into position; the round end accepts a shop-made pivot collar.
Part-presence kicker at a vision station
Nudges unverified parts off the camera lane; the built-in magnet lets a DMSG switch confirm retraction each cycle.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X50SCM the Right Cylinder?
This bore 16 unit is the lightest MAC option; moving to bore 20 raises push to 157.0 N at 0.5 MPa when a fixture needs more. The rod carries an M6x1.0 male thread, and the CM round end accepts ring collars and fabricated pivots; FA flange, LB foot or SDB pivot mounts bolt on separately. Air loss means drift - the cushion only slows the piston near the ends - so add a rod lock or pilot check valve whenever the load has to stay put.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X50SCM FAQ
Expect 100.5 N push and 86.4 N pull at 0.5 MPa, or 140.7 N and 120.9 N respectively at 0.7 MPa. The theoretical maximum is 20.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s, fluid air filtered to 40 um.
Back the needle screws fully off before the first strokes, then close them gradually until end-of-stroke impact disappears. The cushion is variable at both ends, so each direction can be tuned independently for your load and speed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X50SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.