Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X50SU
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X50SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 50mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke50 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X50SU
Compact, corrosion-minded and simple to mount: this MAC16X50SU uses a U flat-end back cover with tapped fixing faces for direct bolting to machine plates. The 16 mm double-acting barrel delivers 100.5 N at 0.5 MPa over a 50 mm stroke, cushioned variably at both ends so you can run quicker cycles without hammering the covers.
Because the riveted stainless barrel and chrome-plated carbon-steel rod resist washdown chemistry, the cylinder suits food benches, outdoor gates and wet machining cells where painted minis rust through. A magnet is standard, so CMSG / DMSG / EMSG switches read end positions without ordering options. Size the job for about 60 N of working push at 0.5 MPa - the balance of the rating absorbs friction, seal drag and pressure dips.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X50SU Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X50SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 50 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X50SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X50SU Is Used
Clamp on a small welding fixture
Pinches a bracket against a jig during tack welding; the chrome rod and stainless barrel shrug off spatter and grinding dust.
Escapement on a coin sorting head
Releases one coin per cycle; a CMSG switch flags the extended position back to the controller.
Lane divider on a tablet packaging line
Shifts tablets between two blister lanes; variable cushioning stops the divider without jolt over the 50 mm travel.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X50SU the Right Cylinder?
Start here if your load stays under about 60 N; heavier jobs belong on the 20 mm bore, which pushes 157.0 N at 0.5 MPa, or larger. The U cover plus FA flange, LB foot or SDB pivot brackets cover most fixed layouts, and I or Y rod knuckles handle offset linkages. The piston is free to drift once air is removed, so a pilot check valve or rod lock is the answer for loads that must be held.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X50SU FAQ
At 0.5 MPa: 100.5 N push and 86.4 N pull. At 0.7 MPa: 140.7 N push and 120.9 N pull. Peak theoretical force is 20.5 kgf at 1.0 MPa. Pressure range is 0.15-1.0 MPa (22-145 psi) with speeds of 30-800 mm/s.
The flat end presents tapped fixing faces, so the cylinder bolts straight onto a machine plate or bracket with no adapter. Add an FA flange, LB foot or SDB pivot when the layout calls for face, base or pivoted mounting instead.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X50SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.