Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X60SU
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X60SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 60mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke60 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X60SU
Flat faces on the U back cover let the MAC16X60SU nest against a machine plate with a single through-bolt, and the cylinder stays a true round-body stainless mini with a riveted barrel rolled onto its covers. Double acting with an adjustable air cushion at both ends, it pushes 100.5 N and pulls 86.4 N at 0.5 MPa. In practice count on near 60 N of working force and a vertical lift of about 10 kg, or around 5 kg with a 2:1 margin.
The 16 mm bore reaches 140.7 N at 0.7 MPa, and the 6 mm hard-chrome rod keeps side scuffing off the seals in repetitive cycles. Grease-retaining two-way piston seals hold lubrication between services. Magnet is built in as standard - CMSG, DMSG or EMSG switches mount directly on the barrel - and the stainless surfaces shrug off the splash found in packaging and bottling rooms.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X60SU Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X60SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 60 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X60SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X60SU Is Used
Soft-jaw fixture clamp
Pinches a rubber hose or cable sleeve in an assembly jig where 60 N of realistic working force is exactly enough.
Coffee-pod reject pusher
Nudges defect pods off a filling line track; the stainless barrel copes with humid, washed-down surroundings.
Incubator vent door nudge
Gently opens a small incubator or oven door 60 mm for venting, the cushion easing the swing at both ends.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X60SU the Right Cylinder?
Nothing smaller exists in the series, so size up when in doubt: a 20 mm bore gives 157 N push at 0.5 MPa and a 25 mm bore 245.3 N. Pressure window is 0.15-1.0 MPa (22-145 psi). Remember the MAC does not lock - centring the valve lets the rod float, so a load held mid-stroke needs a rod lock or pilot check valve. The U cover plus an FA flange or LB foot covers fixed frames, while SDB suits a pivot pin; specify G or NPT threads if your plant does not run PT.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X60SU FAQ
At 0.5 MPa: 100.5 N push, 86.4 N pull. At 0.7 MPa: 140.7 N push, 120.9 N pull. Theoretical ceiling about 20.5 kgf at 1.0 MPa. The 60 mm stroke sits inside the standard 500 mm range, ports are M5x0.8, rod thread M6x1.0, rod 6 mm, speed 30-800 mm/s.
The flat rear face seats against a bracket or machine plate for a single through-bolt fixing with no pivot play. Add an FA flange, LB foot or SDB pivot bracket when the frame needs a dedicated mount, and the built-in magnet keeps CMSG, DMSG and EMSG switch positions flexible along the 60 mm stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X60SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.