Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X75SCA
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X75SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 75mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke75 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X75SCA
Seventy-five millimetres of cushioned travel in a 16 mm stainless barrel: the MAC16X75SCA is double acting, pushing 100.5 N and pulling 86.4 N at 0.5 MPa, rising to 140.7 N at 0.7 MPa. Keep the working figure near 60 N for sizing, and treat vertical lift as about 10 kg, halved to 5 kg when you want a 2:1 margin on the part weight.
The CA pivot back cover accepts a pin, ideal for linkages such as diverter arms and hopper gates that need to follow an arc. The barrel itself is rolled and riveted onto aluminium covers around a grease-storing piston seal, and the 6 mm rod wears 20 um of hard chrome against abrasion. Variable cushions at both ends plus a standard magnet for CMSG, DMSG and EMSG switches round out the package.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X75SCA Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X75SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 75 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X75SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X75SCA Is Used
Diverter arm on a pharma sorter
Swings tablets between two chutes over a 75 mm arc, the cushion softening each landing at speed.
Lid lift on a powder hopper
Pops a small hopper lid open for refill; the pivot cover follows the lid's arc without fighting side load.
Tray indexing pusher
Advances a tray 75 mm between stops on a bakery conveyor, the stainless build handling flour-dust washdown.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X75SCA the Right Cylinder?
The 75 mm stroke stays well inside the 500 mm standard ceiling for this bore, but at that reach keep the rod square to its load - side loading a 6 mm rod bends it and chews the seals. If 100.5 N at 0.5 MPa is marginal, the 20 mm bore pushes 157 N and the 25 mm 245.3 N. Supply pressure 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s. Air loss lets the piston drift freely, so hang a pilot check valve or rod lock on anything that must stay parked. FA flange and LB foot brackets cover fixed mounts alongside the pivot cover.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X75SCA FAQ
Push 100.5 N / pull 86.4 N at 0.5 MPa; push 140.7 N / pull 120.9 N at 0.7 MPa; roughly 20.5 kgf maximum theoretical at 1.0 MPa. Stroke 75 mm standard (bore ceiling 500 mm), 6 mm rod with M6x1.0 thread, M5x0.8 ports, 30-800 mm/s speed.
A pivot lets the body follow the natural arc of levers, gates and lids instead of fighting it with side load. Pair the CA cover with an SDB pivot bracket, or bolt an FA flange or LB foot onto the same barrel; the built-in magnet already supports CMSG, DMSG and EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X75SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.