Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X75SU
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X75SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 75mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke75 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X75SU
Double-acting on both strokes with a variable air cushion at each end, the MAC16X75SU delivers 100.5 N of push and 86.4 N of pull at 0.5 MPa, rising to 140.7 N push at 0.7 MPa. In practice size the job to roughly 60 N so the 16 mm bore is never on its limit - that headroom is what keeps cycling consistent.
The U back cover is a flat, bolt-down face for fixed machine plates, while the riveted stainless barrel and 20 um hard-chrome rod take splash, mist and mild washdown that would rust painted minis. A magnet comes built in as standard, so CMSG / DMSG / EMSG switches detect end positions with no piston upgrade. Speed window is 30-800 mm/s at 0.15-1.0 MPa (22-145 psi).
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X75SU Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X75SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 75 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X75SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X75SU Is Used
Reject gate on a check-weigher
Swings a flap to divert underweight packs; 100.5 N at 0.5 MPa is ample for a light gate and the flat U cover bolts straight to the frame plate.
Carton tab tucking on a small wrapper
Folds carton tabs at 30-800 mm/s; the variable cushion stops the tab crease from taking an end-of-stroke knock on every cycle.
Cable-feed pusher in wire processing
Feeds connector pigtails into a crimp station; the standard magnet drives a DMSG switch to confirm each feed before crimping starts.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X75SU the Right Cylinder?
Compare before you commit: bore 20 pushes 157 N at 0.5 MPa if 100.5 N is marginal, and there is no smaller MAC bore, so 16 mm is the floor of the range. Remember this cylinder will not hold load when air is lost - the piston drifts - so fit a pilot check valve or rod lock where holding matters. The 75 mm stroke sits well under the 500 mm standard limit for bore 16, and M5x0.8 ports plus an M6x1.0 male rod thread keep plumbing and tooling small.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X75SU FAQ
Push is 100.5 N and pull 86.4 N at 0.5 MPa; at 0.7 MPa push climbs to 140.7 N with 120.9 N on the pull side. Peak theoretical force at 1.0 MPa is 20.5 kgf for a 16 mm bore. Operating pressure is 0.15-1.0 MPa (22-145 psi) and proof pressure is 1.5 MPa (215 psi).
It gives a flat machined face so the cylinder bolts flush to a plate or bracket without pivots or adapters. Combined with the riveted stainless barrel and chrome-plated rod, the body tolerates damp and light washdown, and the built-in magnet works with CMSG, DMSG and EMSG switches as standard.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X75SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.