Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X80SCA
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X80SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 80mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke80 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X80SCA
A CA pivot eye in the back cover lets the MAC16X80SCA swing on levers, linkages and clamp arms without a separate bracket. The cylinder itself is a double-acting mini with a variable air cushion at both ends: 100.5 N push and 86.4 N pull at 0.5 MPa, rising to 140.7 N at 0.7 MPa. Size link forces to about 60 N so the 16 mm bore never runs at its ceiling.
Behind the pivot sits a rolled stainless-steel barrel with a hard-chrome plated 6 mm rod, a combination that resists washdown and outdoor damp where painted minis corrode. The magnet is standard fitment, so CMSG / DMSG / EMSG switches read stroke position straight away, and the cushion needles tune arrival shock across the 30-800 mm/s speed band.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X80SCA Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X80SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 80 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X80SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X80SCA Is Used
Clamp arm on a welding fixture
A swing clamp link holds sheet steel against a jig; the CA pivot eye follows the arm arc and 100.5 N keeps thin plate seated.
Divider blade between conveyor lanes
Swings a guide blade to split carton flow; the variable cushion stops the blade rattling at the end of each 80 mm sweep.
Index lever on a small rotary table
Drives a pawl lever through 80 mm; the magnet plus a CMSG switch confirms detent position before the table turns.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X80SCA the Right Cylinder?
The 16 mm bore is the smallest in the MAC line; if 100.5 N at 0.5 MPa leaves no margin, the 20 mm bore offers 157 N and the 25 mm bore 245.3 N at the same pressure. A pivot mount suits swinging motion, but the rod will drift if air pressure drops - a pilot check valve or rod lock holds a suspended load. Stroke is 80 mm against a 500 mm standard maximum for bore 16, ports are M5x0.8, and the M6x1.0 rod thread takes standard I or Y knuckles.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X80SCA FAQ
At 0.5 MPa the 16 mm bore pushes 100.5 N and pulls 86.4 N; at 0.7 MPa those become 140.7 N and 120.9 N. Maximum theoretical force at 1.0 MPa is 20.5 kgf. It runs on 0.15-1.0 MPa (22-145 psi), tolerates 1.5 MPa (215 psi) proof pressure, and cycles at 30-800 mm/s.
When the cylinder works through an arc - clamp arms, diverters, levers - the CA eye lets the body swing instead of fighting the pin. It mounts without extra brackets, the stainless barrel and hard-chrome rod cope with damp or washed-down areas, and the standard magnet fits CMSG, DMSG or EMSG switches for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X80SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.