Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X80SCM
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X80SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 80mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke80 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X80SCM
Round-ended and riveted, the MAC16X80SCM wraps a double-acting piston in a stainless barrel that shrugs off damp, mist and light washdown. At 0.5 MPa the 16 mm bore produces 100.5 N of push and 86.4 N of pull; 0.7 MPa lifts push to 140.7 N. Keep real duty near 60 N so the bore cycles with headroom instead of straining at its rating.
The CM back cover ends in a plain rounded boss for simple fixed fixing, while a variable air cushion at both ends tames arrival shock across the 30-800 mm/s speed band. Every cylinder ships with the magnet already fitted - no special-order piston - so CMSG / DMSG / EMSG switches drop on for end-of-stroke sensing. Operating window is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X80SCM Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X80SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 80 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X80SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X80SCM Is Used
Pallet-marker pin on a loading dock
Pops a marker pin to signal pallet position outdoors; the stainless barrel and chrome rod weathers dock duty that would corrode painted housings.
Lid kick-off above a small rinse tank
Tips finished lids off a rinse tank conveyor; the riveted stainless body tolerates splash and the 60 N class force suits light lids.
Bin-flag actuator in parts kitting
Raises a flag to show a kit bin is empty; the standard magnet drives an EMSG switch so the MES logs the refill automatically.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X80SCM the Right Cylinder?
Against neighbours: the next bore up, 20 mm, gives 157 N push at 0.5 MPa, while nothing in the MAC family is smaller than 16 mm. If the load hangs on the rod, note that a plain double-acting cylinder drifts the moment air is removed - specify a rod lock or pilot check valve for held positions. The 80 mm stroke is far below the 500 mm standard ceiling for bore 16, but protect the 6 mm rod from side loads on any long unsupported run. M5x0.8 ports keep plumbing compact and the rod thread is M6x1.0.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X80SCM FAQ
Push is 100.5 N and pull 86.4 N at 0.5 MPa, rising to 140.7 N push and 120.9 N pull at 0.7 MPa. The 16 mm bore peaks at about 20.5 kgf theoretical at 1.0 MPa. Supply 0.15-1.0 MPa (22-145 psi), keep speed between 30-800 mm/s, and the 1.5 MPa (215 psi) proof rating covers pressure spikes.
Its rounded boss gives a tidy fixed fixing point where no pivot is needed, pairing with the riveted stainless barrel and hard-chrome plated rod for damp or lightly washed environments. The variable cushion at each end smooths the 80 mm arrival, and the magnet fitted as standard takes CMSG, DMSG or EMSG switches without ordering options.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC16X80SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.