Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X100SU
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X100SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 100mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke100 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X100SU
A U flat-end back cover makes the MAC20X100SU easy to fixture flush against a machine plate. Double acting with a variable air cushion at each end, it pushes 157 N and pulls 132 N at 0.5 MPa over its 100 mm stroke.
Inside is a rolled stainless barrel with a hard-chrome plated carbon-steel rod, so mild corrosion and washdown are non-events compared with painted-steel minis. Speed runs 30-800 mm/s on air at 0.15-1.0 MPa (22-145 psi). Every unit carries its magnet as standard, letting CMSG, DMSG or EMSG switches snap on for end-of-stroke signals.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X100SU Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X100SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 100 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X100SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (double rod, adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X100SU Is Used
Jig clamping on a lathe
Clamps small turned parts in a second-operation fixture, the U flat-end cover bolting flat to the jig body with 157 N of squeeze.
Chip-drawer slide
Opens and closes a swarf drawer under a CNC machining centre, about 8 kg of vertical lift capability handling the loaded drawer.
Presence pusher
Nudges components past a vision camera on an electronics line, a CMSG switch on the standard magnet confirming full extension.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X100SU the Right Cylinder?
Compare before ordering: the 16 mm bore pushes 100 N at 0.5 MPa while the 25 mm bore manages 245 N, so step up if your load sits near the limit. Note that a plain MAC will not hold position when the valve centres - the rod coasts - so add a rod lock for held loads. Mount through the flat-end cover screwed to a plate, or bolt on FA flange, LB foot or SDB pivot hardware, and open the cushion needles fully before first cycling.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X100SU FAQ
Push at 0.5 MPa is 157 N and pull 132 N. At 0.7 MPa push reaches 220 N, and the theoretical maximum at 1.0 MPa is 32 kgf. Pressure range is 0.15-1.0 MPa (22-145 psi); bore 20 mm, stroke 100 mm, rod thread M8x1.25, port 1/8 inch.
Needle screws at both ends bleed the cushion chambers. On commissioning back them fully off, then close gradually until end-of-stroke noise and recoil disappear, letting you raise speed toward 800 mm/s without hammering the covers.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X100SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.