Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X120SCA
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X120SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 120mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke120 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X120SCA
Air both extends and retracts the rod on this double-acting MAC cylinder, and a variable air cushion at each end absorbs stop shock over the 120 mm stroke. At 0.5 MPa it pushes 157.0 N, and the CA pivot eye on the back cover lets the unit swing with a linkage instead of needing a separate knuckle. Supply runs 0.15-1.0 MPa (22-145 psi) with speed settable from 30-800 mm/s.
The riveted stainless round barrel and hard-chrome plated 8 mm rod shrug off washdown and outdoor damp that would pit painted mini cylinders. Worked out from the 157 N push, that is roughly 16 kg of lift capability - keep to about 8 kg per vertical lift for a 2:1 margin. The piston magnet ships as standard, so CMSG, DMSG or EMSG switches drop on without a special order.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X120SCA Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X120SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 120 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X120SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X120SCA Is Used
Reject arm on a snack-food line
The CA pivot eye bolts straight to a linkage that swings misprinted wrappers off the belt, with the variable cushion softening each end of the 120 mm sweep.
Lifting mold pins in injection tooling
With about 8 kg of vertical lift at a 2:1 margin on the 157 N push at 0.5 MPa, small die pins lift clear of the fixture without an oversized cylinder.
Tray pusher in a dairy wash zone
Rinsed down every shift, the stainless barrel and hard-chrome rod resist the corrosion that ruins painted minis on wet conveyors.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X120SCA the Right Cylinder?
Size against neighbours at 0.5 MPa push: 100.5 N for bore 16, 157.0 N here, 245.3 N for bore 25. The CA pivot eye suits linkages that swing; if the frame is fixed instead, FA flange, LB foot or SDB pivot brackets fit the same body. Remember the cushion does not hold position - with air off the piston drifts, so a rod lock or pilot check valve is needed for parked loads. At 120 mm of stroke keep side load off the 8 mm rod and guide the work separately.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X120SCA FAQ
At 0.5 MPa it pushes 157.0 N and pulls 131.9 N; at 0.7 MPa those rise to 219.8 N push and 184.7 N pull. The theoretical maximum is 32.0 kgf at 1.0 MPa. Ports are 1/8" on the 20 mm bore, and the 8 mm rod carries an M8x1.25 male thread. The 120 mm stroke is within this bore's 500 mm standard range.
Yes. The cushion is variable at both ends, so back the needle screws fully off at first run and close them gradually until end-of-stroke shock disappears. That way you can push cycle speed or load weight up without hammering the covers, within the 30-800 mm/s speed band.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X120SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.