Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X150SU
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X150SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 150mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke150 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X150SU
Pick the MAC20X150SU when the mounting bolt passes straight through the flat-end U back cover into your machine wall - the simplest fixed install in the 20 mm MAC family. Supplied with a standard magnet and 1/8" ports, it is double acting with a variable cushion at both ends, delivering 157 N push and 131.9 N pull at 0.5 MPa and 219.8 N at 0.7 MPa across a 150 mm stroke.
Construction is the AirTAC mini formula: a stainless round barrel rolled onto aluminium covers, an 8 mm hard-chrome rod and grease-retaining two-way piston seals. That build takes damp workshops and intermittent washdown in stride. Count on close to 94 N of real pushing effort at 0.5 MPa, equivalent to raising about 8 kg against gravity with a 2:1 safety factor, at any speed from 30 to 800 mm/s.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X150SU Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X150SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 150 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X150SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X150SU Is Used
Cap coder press
Presses date-coded caps onto shampoo bottles on a cosmetics line; the flat-end body bolts straight to the frame plate and the cushion keeps the imprint crisp.
Mold ejector
Ejects thin plastic lids from a small thermoform cavity using about 94 N of working push - gentle enough to avoid warping the part.
Bench stop gate
Stops parts at a drill-press fence on a training workshop bench, with an EMSG switch telling the PLC the gate has fully retracted.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X150SU the Right Cylinder?
The flat-end U cover presents a flat face so the body bolts directly to a surface, which is why it is a favourite for compact fixtures. On force it outruns the 16 mm bore (100.5 N at 0.5 MPa) by about half and hands off to the 25 mm bore (245.3 N) for heavier work. Remember the rod is free: kill the air and the load moves, so a pilot check valve or rod lock is the fix where position must persist. FA flange or SDB pivot brackets, CA or CM back covers and the standard piston magnet for CMSG, DMSG and EMSG switches let you reconfigure without changing series. Span the 150 mm stroke with a guide bushing when the load is not perfectly in line with the 8 mm rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X150SU FAQ
The 20 mm bore produces 157 N push and 131.9 N pull at 0.5 MPa, 219.8 N push and 184.7 N pull at 0.7 MPa, and a theoretical 32.0 kgf at 1.0 MPa. Supply pressure is 0.15-1.0 MPa (22-145 psi) with air filtered to 40 um.
Yes - the U flat-end back cover presents a flat face so the body bolts directly to a machine wall or fixture plate without extra brackets. If you later need a flange or pivot, FA, SDB and CA or CM options are in the same series, and the standard magnet keeps CMSG, DMSG and EMSG switch use unchanged.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X150SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.