Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X200SCA
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X200SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 200mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke200 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X200SCA
Reach 200 mm from a 20 mm bore with the MAC20X200SCA, a double-acting round mini whose variable air cushions at both ends can be tuned to kill end-of-stroke bang. At 0.5 MPa it delivers 157 N forward and 131.9 N back; at 0.7 MPa that is 219.8 N forward, and the theoretical ceiling sits at 32 kgf at 1.0 MPa. Supply 0.15-1.0 MPa (22-145 psi) air filtered to 40 um and run 30-800 mm/s.
Aluminium covers and a stainless block are rolled onto the stainless tube, a construction that resists corrosion in food-adjacent and outdoor plant without paint to chip. In round numbers the 0.5 MPa rating supports about 94 N of genuine work - call it a vertical lift of some 8 kg when you halve the 16 kg capability for a 2:1 margin.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X200SCA Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X200SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 200 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X200SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X200SCA Is Used
Battery-car latch on AGV
Throwing a hold-down latch on an automated guided vehicle's battery tray - outdoor duty suits the stainless body, and the pivot cover matches the latch link.
Wood-glue spreader arm
Sweeping a glue roller across 200 mm of panel edge on a small cabinet line, with the cushion softening each reversal at speed.
Inspection camera shuttle
Sliding a vision camera into and out of a dial-machine station; EMSG switches trigger image capture at the exact in and out positions.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X200SCA the Right Cylinder?
Weigh a 16 mm bore (100.5 N push at 0.5 MPa) against a 25 mm bore (245.3 N) before committing; this 20 mm size splits the difference. With 200 mm of travel, brace the stroke: unsupported side load is the fastest way to score the barrel, so guide the load externally. Air loss means motion - the rod wanders once pressure fades, so specify a rod lock or pilot check valve where position must survive a power cut. The CA pivot back cover suits linkages, optional FA flange, LB foot or SDB pivot brackets cover fixed bases, and the built-in magnet already suits CMSG / DMSG / EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X200SCA FAQ
At 0.5 MPa: 157 N push, 131.9 N pull. At 0.7 MPa: 219.8 N push, 184.7 N pull. Theoretical maximum 32 kgf at 1.0 MPa. Operating band 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s, with dual adjustable air cushions.
The 20 mm bore is supplied with 1/8" air ports on both covers and an M8x1.25 male thread on the 8 mm chrome-plated rod. PT is the default thread family with G and NPT orderable, and non-standard strokes are made to order.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC20X200SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.