Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X100SU
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X100SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 100mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke100 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X100SU
A flat-end U back cover and a 100 mm stroke make the MAC25X100SU an easy drop-in for slide mounts that need a clean, bracket-free face. The 25 mm round barrel is stainless steel, the rod hard-chrome plated carbon steel, and both aluminium covers are rolled on - a sealed pack that tolerates washdown and outdoor dust. Double acting, with a variable air cushion at each end.
Force class: 245.3 N push at 0.5 MPa, 343.4 N at 0.7 MPa. Derate to about 147 N for continuous work at 0.5 MPa; vertically that is roughly 25 kgf, so halve it and you can lift about 12 kg with margin. Media is filtered air, 0.15-1.0 MPa (22-145 psi), -20 to +70 C, 30-800 mm/s.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X100SU Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X100SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 100 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X100SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X100SU Is Used
Bench bush press
Seats small sintered bushings into pump end covers on a bench press; 245.3 N at 0.5 MPa handles the light interference fit without marking the housing.
Lane diverter blade
Switches small totes between two conveyor lanes at a distribution hub; the U flat end keeps the body flush against the gate bracket.
Inspection camera lift
Raises a vision camera over phone glass at a QC station; with a 2:1 margin the bore lifts about 12 kg vertically, well above the 1.5 kg assembly.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X100SU the Right Cylinder?
Compare bores: the 20 mm version gives 157.0 N at 0.5 MPa if the load is light, while a 32 mm MAC raises push to 402.2 N at 0.5 MPa for heavier clamps. This 100 mm stroke is standard; up to 500 mm is available on the 25 mm bore without a custom order.
The U flat-end cover accepts fixed mount hardware directly; add FA flange or LB foot accessories where the frame needs them, or an SDB pivot bracket for a swinging axis. Every unit ships with the piston magnet already installed - CMSG, DMSG and EMSG switches clip on and read end positions immediately. When the valve centres or air drops, the rod floats freely, so a vertical or held load needs a rod lock or check valve downstream.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X100SU FAQ
At 0.5 MPa the 25 mm bore pushes 245.3 N and pulls 206.1 N; at 0.7 MPa push rises to 343.4 N. Theoretical peak is 50 kgf at 1.0 MPa. Supply 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), fluid air filtered to 40 um.
Yes. The magnet is standard on every MAC25X100SU, not an option, so CMSG, DMSG or EMSG switches mount directly on the barrel for end-of-stroke or mid-stroke signalling. Sensors detect through the stainless tube, and the 100 mm stroke allows switching anywhere along the travel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X100SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.