Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X175SCM
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X175SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 175mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke175 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X175SCM
A riveted round body built from a stainless-steel barrel with a hard-chrome plated 10 mm rod, the MAC25X175SCM is a double acting mini cylinder with a variable air cushion at both ends. At 0.5 MPa it pushes with 245 N (245.3 N), so plan on roughly 147 N of real work once you keep a margin for friction and wear.
The CM round-end back cover takes a pivot pin directly, and the rolling-packed covers shrug off washdown and damp far better than painted minis. Speed runs 30-800 mm/s across 0.15-1.0 MPa (22-145 psi), and the cushion needle screws let you soften the 175 mm stroke ends so faster cycles do not hammer the covers.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X175SCM Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X175SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 175 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X175SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X175SCM Is Used
Tray indexing on packaging lines
The 245 N push at 0.5 MPa indexes small food trays down a 175 mm pitch while the stainless barrel survives daily caustic washdown.
Connector staking on small assemblies
Around 147 N of usable work force crimps terminals and stakes plastic bosses without stressing a delicate fixture.
Hopper gate opening on dosing units
The CM round-end cover pins straight to the gate lever, and the variable cushion stops the 175 mm stroke from slamming at either end.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X175SCM the Right Cylinder?
If 245 N at 0.5 MPa is more than the job needs, the bore 20 MAC gives 157 N; if the load climbs, step up to bore 32 for 402 N. This 175 mm stroke sits well inside the 500 mm standard range for bore 25, so it ships as a catalogue item. The piston drifts when air is removed - it is not a position holder, so add a rod lock or pilot check valve where the load must stay put. Keep the 10 mm rod side-load free over 175 mm with external guides, and bolt on FA flange, LB foot or SDB pivot brackets as the frame allows; CMSG, DMSG or EMSG switches read the standard built-in magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X175SCM FAQ
At 0.5 MPa it pushes 245.3 N and pulls 206.1 N; at 0.7 MPa that rises to 343.4 N push and 288.5 N pull. The theoretical ceiling at 1.0 MPa is about 50 kgf. Pressure window is 0.15-1.0 MPa (22-145 psi) and speed 30-800 mm/s.
It lets you pin the cylinder straight to a pivot or link arm without fabricating a bracket, and the stainless round barrel plus hard-chrome 10 mm rod keeps rust out of washdown or outdoor duty. The 1/8" ports come in PT, G or NPT thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X175SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.