Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X250SCA
AirTAC B06-MAC25X250SCA Battery-Powered Cylinder Specifications
- Model: B06-MAC25X250SCA
- Series: MAC (Compact Battery-Driven Series)
- Bore size: 25mm
- Stroke: 250mm
- Action type: Double-acting with spring return
- Mounting style: Standard ISO 15552 front flange + rear foot
- Operating pressure: 0.05–0.8 MPa
- Temperature range: -20℃ to 80℃
- Buffer type: Adjustable pneumatic cushioning
- Position sensing: Built-in magnet for reed switch compatibility
- Material:
- Cylinder tube: Hard anodized aluminum alloy
- End covers: Die-cast aluminum
- Piston rod: Stainless steel (SUS304)
- Seals: NBR (Nitrile rubber)
- Weight: 1.85kg (with mounting brackets)
- Dimensions: 320mm(L) × 40mm(W) × 40mm(H) (at full extension)
- Rod thread: M10×1.25
- Air port size: Rc1/8 (G1/8 optional)
- Lubrication: Pre-lubricated (Oil-free operation possible)
Energy-efficient pneumatic cylinder optimized for battery-powered systems, featuring low friction design (≤0.15 dynamic friction coefficient) and IP67-rated dust/water resistance. Integrated power-saving mode reduces energy consumption by 30% during idle states. Requires dry air with 5-40μm filtration.
- Mobile robotic arms in warehouse automation
- Solar-powered agricultural irrigation controls
- Portable medical ventilator mechanisms
- Electric vehicle battery pack assembly systems
- Off-grid packaging machinery
Installation protocol:
Maintain ≤0.5mm/m alignment tolerance during mounting. For vertical installations,
use auxiliary rod-end support when stroke exceeds 200mm. Lubricate guide shafts
every 5,000km of cumulative travel in high-usage scenarios.
| Property | Property Value |
|---|---|
| sku | B06-MAC25X250SCA |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.