Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X450SCA
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X450SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 450mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke450 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X450SCA
With 450 mm of stroke and a CA pivot back cover, the MAC25X450SCA suits long linkages and lever arms that swing as they push. The cylinder is double acting with a variable air cushion at each end, running on air at 0.15-1.0 MPa (22-145 psi), and its riveted stainless barrel plus hard-chrome plated rod stand up to washdown and weather.
Numbers to size by: 245 N push and 206 N pull at 0.5 MPa; 343 N push at 0.7 MPa; 50 kgf theoretical peak at 1.0 MPa. In practice plan near 147 N of working force, about 12.5 kg lifted vertically at a 2:1 margin. Every unit ships with the magnet built in, so CMSG / DMSG / EMSG switches clip on without ordering a special piston.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X450SCA Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X450SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 450 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X450SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X450SCA Is Used
Lever-arm tilt on a palletizer grip
The CA pivot back cover rides a rotating lever that tilts cartons into place; 245 N at 0.5 MPa swings the arm briskly.
Dock gate arm raise on a small forklift attachment
Lifts a lightweight barrier arm through 450 mm of travel, with the pivot mount absorbing the arc naturally.
Belt tensioner take-up on a long conveyor
Pushes a sliding take-up pulley 450 mm to re-tension the belt; the cushion eases the pulley against the stop.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X450SCA the Right Cylinder?
Compare before committing: the 20 mm bore gives 157 N at 0.5 MPa and the 32 mm gives 402 N, bracketing this 25 mm barrel for mid-load lever work. If the lever must hold position, note that a standard MAC drifts the moment air drops or the valve centres - use a rod lock or pilot check valve downstream. The CA pivot cover handles rotating mounts directly; FA flange, LB foot or SDB pivot brackets and I / Y knuckles cover the rest. Across 450 mm of stroke, keep the pivot axis square to the cylinder, or side load will sooner or later bend the 10 mm chrome rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X450SCA FAQ
Push 245.3 N and pull 206.1 N at 0.5 MPa; push 343.4 N at 0.7 MPa; 50 kgf theoretical maximum at 1.0 MPa. This double-acting 25 mm bore uses 1/8" ports and an M10x1.25 threaded 10 mm rod, works between 0.15-1.0 MPa (22-145 psi), withstands 1.5 MPa (215 psi) proof pressure, and runs at 30-800 mm/s.
No - the magnet is standard in every MA-series piston, so CMSG, DMSG or EMSG switches mount directly on the barrel for end-of-stroke or mid-stroke signalling without a special-order cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC25X450SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.