Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X100SCA
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X100SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 100mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke100 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X100SCA
With a 32 mm bore and 100 mm stroke, the MAC32X100SCA sits in the everyday workhorse band of the MAC range: double acting, so air drives the rod out and back, with a variable air cushion at each end to soften arrival. Push force is 402 N and pull force 346 N at 0.5 MPa, rising to 563 N at 0.7 MPa. The rolled stainless barrel, aluminium covers and hard-chrome plated rod (20 um) shrug off washdown and damp shop air far better than painted-steel minis.
Plan real work at roughly 241 N (60 percent of the 0.5 MPa push figure) and you keep a healthy margin; on a vertical lift that equals about 20 kg with a 2:1 safety factor. The built-in magnet is standard, so CMSG, DMSG or EMSG switches clip straight on, and the CA pivot back cover pins directly to your linkage with no extra bracket.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X100SCA Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X100SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 100 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X100SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X100SCA Is Used
Weld fixture clamp arm
The CA pivot eye pins straight to a toggle clamp linkage on a car-body welding jig; 100 mm of travel opens the arm clear for loading and 402 N at 0.5 MPa clamps it home.
Carton push-off diverter
Mounted across a parcel conveyor, the cylinder kicks cartons off the line at up to 800 mm/s while the cushion kills the stop shock at full extension.
Rotary table index stop
Pivot-mounted on a machining cell indexing table, the SCA swings a stop out of the way each cycle; the built-in magnet feeds a CMSG switch for position confirmation.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X100SCA the Right Cylinder?
If 402 N at 0.5 MPa is more than the job needs, a 25 mm bore gives 245 N in the same body style; if the load grows, step up to 40 mm for 628 N. Ports are 1/8" on this bore with an M10x1.25 male rod thread; air at 0.15-1.0 MPa (22-145 psi) and speeds of 30-800 mm/s cover most general machine work. Because a plain double-acting cylinder drifts when the valve centres, fit a rod lock or pilot check valve if the load must stay put. The CA pivot cover pairs with an SDB pivot bracket, while FA flange and LB foot mounts and I/Y rod knuckles bolt on when the layout calls for them.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X100SCA FAQ
At 0.5 MPa the 32 mm bore pushes 402 N and pulls 346 N; at 0.7 MPa those rise to 563 N and 484 N, and the theoretical maximum is 82 kgf at 1.0 MPa. Rod speed runs 30-800 mm/s, working pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof limit, and the standard stroke ceiling for this bore is 500 mm, so the 100 mm stroke is well inside it.
Back both cushion needle screws fully off before the first cycle, then close them gradually until end-of-stroke impact disappears. The cushion is variable, not fixed, so you can re-tune it as load or speed changes - useful when running toward the 800 mm/s top speed with a heavy part.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X100SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.