Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X100SU
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X100SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 100mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke100 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X100SU
Flat on the back and simple to bolt down, the MAC32X100SU uses the U flat-end cover for rigid, bracket-friendly mounting. Inside is the standard MAC recipe: double acting, cushioned variably at both ends, 402 N push and 346 N pull at 0.5 MPa from the 32 mm bore, with a stainless barrel and a hard-chrome plated 12 mm rod.
Size with margin: the practical continuous load is about 241 N, and vertically the cylinder lifts roughly 20 kg when you keep a 2:1 reserve. The U cover takes FA flange or LB foot hardware directly, the piston magnet is fitted as standard for CMSG / DMSG / EMSG switches, and air cushioning absorbs stop shock at any speed up to 800 mm/s.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X100SU Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X100SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 100 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X100SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X100SU Is Used
Bench press station
A small punch or forming press gains 563 N at 0.7 MPa across a 100 mm stroke, the U cover bolting flat to the press head plate.
Case lifting platform
A lift-and-lower platform under a case packing head raises about 20 kg per stroke with cushioned landings at both extremes.
Kitting slide actuator
On an electronics kitting line the flat-ended body mounts under a sliding tray that sorts components into bins, speed dialled anywhere between 30 and 800 mm/s.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X100SU the Right Cylinder?
Downshift to 25 mm (245 N at 0.5 MPa) for lighter clamps or up to 40 mm (628 N) for heavier presses within the same MAC family. Porting is 1/8" with an M10x1.25 male rod thread, and the 100 mm stroke sits far below the 500 mm ceiling of this bore. Where the application must hold position with the valve centred, plan a rod lock or pilot check valve - the cushion is a damper, not a brake. Fixed frames suit the U cover with FA or LB mounts; pivoting duty is better served by the CA or CM back-cover variants.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X100SU FAQ
Extension force 402 N and retraction 346 N at 0.5 MPa; 563 N and 484 N respectively at 0.7 MPa; 82 kgf theoretical maximum at 1.0 MPa. Stroke 100 mm (bore standard limit 500 mm), speed range 30-800 mm/s, operating pressure 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi).
The U cover presents a flat machined face, so flange and foot brackets seat squarely without adapters - ideal for fixed linear slides and press heads. If the load needs to pivot, order the CA pivot or CM round-end variant instead; the piston, forces and cushioning are identical.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X100SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.