Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X125SCA
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X125SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 125mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke125 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X125SCA
Position feedback comes at no extra cost here: the magnet is built into the piston as standard, so CMSG, DMSG or EMSG reed switches can be clipped on to confirm extend and retract across the 125 mm stroke. Bore output is 402 N push and 345.6 N pull at 0.5 MPa, and 563 N at 0.7 MPa.
The CA pivot back cover takes clevis mounting for swinging tooling, while the riveted stainless barrel and hard-chrome rod handle splashes and outdoor air better than painted mini bodies. At 0.5 MPa plan on about 241 N for real work - roughly 20 kg lifted vertically once a 2:1 margin is applied.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X125SCA Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X125SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 125 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X125SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X125SCA Is Used
Extend and retract verification
CMSG switches at both stroke ends confirm the press anvil returned before the operator loads the next part on a small assembly cell.
Label press roller
Presses labels onto jars on a benchtop semi-auto line; cushioning stops the roller bouncing at bottom of stroke.
Vibratory bowl escapement
Releases one part per cycle into the assembly nest; the 30-800 mm/s speed range matches the bowl metering rate.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X125SCA the Right Cylinder?
For lighter work the 25 mm bore gives 245.3 N at 0.5 MPa; for heavier duty the 40 mm bore gives 628.3 N - 32 mm covers the middle band. There is no position hold: cut the air and gravity or return forces move the rod freely, so pilot check valves or a rod lock protect parked loads. The CA pivot cover carries swinging links, and over the 125 mm stroke keep side loads low to avoid rod and bushing wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X125SCA FAQ
Expect 402 N of push and 345.6 N of pull at 0.5 MPa. Raise the supply to 0.7 MPa and those become 563 N and 483.8 N; the theoretical maximum at 1.0 MPa is about 82 kgf. Ports are 1/8 inch, the rod thread is M10x1.25, and the operating range is 0.15-1.0 MPa (22-145 psi).
The magnet is built into the piston as standard equipment, not a paid upgrade. Clip AirTAC CMSG, DMSG or EMSG reed switches at any point along the stainless barrel to signal extend and retract - no special-order piston is required.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X125SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.