Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X150SCA
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X150SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 150mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke150 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X150SCA
A 150 mm stroke on a 32 mm bore gives the MAC32X150SCA room to swing parts clear of the machine line, and the CA pivot back cover lets the cylinder articulate with the mechanism instead of fighting it. Inside sits a rolling-packed stainless barrel and a hard-chrome 12 mm rod; outside, double acting supply with a variable cushion at each end. At 0.5 MPa expect 402 N on extend and 346 N on retract.
Pivot mounting plus a built-in piston magnet (standard equipment) means CMSG or DMSG switches ride along the barrel for end-position sensing. Size the job at about 241 N of dependable force - 60 percent of the 0.5 MPa rating - and the cylinder will lift roughly 20 kg vertically with a 2:1 safety margin.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X150SCA Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X150SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 150 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X150SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X150SCA Is Used
Swing-Arm Part Transfer
Drives a pick-and-place arm that rotates a bracket between two stations; 402 N at 0.5 MPa covers reach plus payload.
Lid Tipping on Mixers
Opens a hinged mixer lid through a 150 mm arc; the CA pivot follows the hinge so side loads stay off the rod.
Carton Flap Fold
Folds heavy flaps on case packers; variable cushions let the arm land soft even when run near the 800 mm/s top speed.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X150SCA the Right Cylinder?
At 0.5 MPa the 25 mm bore manages 245 N and the 40 mm bore 628 N, so pick the 32 mm when your load falls between. The CA eye lets the cylinder pivot through an arc; add an SDB pivot bracket or I/Y rod knuckle to complete the linkage. If the moved load must stay put with the valve centred, remember this cylinder will drift - a pilot check valve or rod lock is the fix. Ports are 1/8 inch PT, rod thread M10x1.25.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X150SCA FAQ
Push is 402 N and pull 346 N at 0.5 MPa; at 0.7 MPa the push reaches 563 N, and the 32 mm bore tops out at a theoretical 82 kgf. Operating pressure runs 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi).
The CA pivot eye lets the cylinder swing with a lever or linkage, avoiding rod side loading. Combine it with an SDB pivot bracket, and use the standard magnet with CMSG or EMSG switches to signal the 150 mm stroke ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC32X150SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.