Airtac B06-MAC Battery-Specific Cylinder B06-MAC40X110SCA
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC40X110SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 110mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke110 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC40X110SCA
A CA pivot eye in the rear cover lets the MAC40X110SCA hang in a clevis and let its rod follow a moving lever instead of straining against side load. Internally it is double acting: air drives the piston both ways and a variable cushion at each end bleeds off the last of the travel, so at 0.5 MPa the 628.3 N push (527.8 N pull) lands soft on the covers.
The round barrel is stainless steel riveted to aluminium-alloy covers with a stainless-steel block, and the 16 mm rod carries 20 um of hard chrome - a package that shrugs off washdown mist and outdoor damp where painted minis rust. A magnet sits in the piston as standard, so CMSG, DMSG and EMSG switches clip straight onto the barrel with no special-order piston. Run it on 0.15-1.0 MPa (22-145 psi) filtered air at 30-800 mm/s.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC40X110SCA Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC40X110SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 110 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC40X110SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (double rod, adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC40X110SCA Is Used
Swing clamp on a welding fixture
Mounted in a clevis, the CA pivot lets the cylinder rock with a clamp arm as it pulls a lever down over a bracket weld, the 628.3 N push holding the clamp through the tack.
Packaging line lid kicker
Pivoted under a conveyor rail, the rod flicks misaligned carton lids upright before the sealing head, cushioned so the 110 mm flick does not crack the covers.
Test rig lever follower
In a small fatigue bench the pivot mount lets the rod track a rocking sample arm through 110 mm while a DMSG switch on the barrel logs each end point.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC40X110SCA the Right Cylinder?
For a 110 mm stroke pushing around 377 N of real load, the 40 mm bore sits well: a 32 mm MAC manages only 402.2 N raw at 0.5 MPa and leaves little for friction, while a 50 mm bore gives 981.3 N if the job later grows. Keep 0.7 MPa in reserve too - push climbs to 879.6 N there. Note that this is a plain double-acting cylinder, so when the valve centres the rod drifts freely; add a rod lock or pilot check valve if the load must stay put.
The CA pivot pairs with SDB pivot brackets or the I and Y rod knuckles on the rod side, and the 1/8" port takes standard PT fittings. Every unit carries the standard magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC40X110SCA FAQ
At 0.5 MPa it pushes 628.3 N and pulls 527.8 N; at 0.7 MPa push rises to 879.6 N and pull to 738.9 N. The theoretical ceiling is about 128.1 kgf at 1.0 MPa. Keep real working load near 377 N at 0.5 MPa for a safe margin.
Back both needle screws fully out, run the piston slowly through the 110 mm stroke, then close each screw gradually until end-of-stroke impact disappears at your working speed. The cushion is variable air, not a lock - it cannot hold a load if air is lost.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC40X110SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.