Airtac B06-MAC Battery-Specific Cylinder B06-MAC50X200SCA
The AirTAC Airtac B06-MAC Battery-Specific Cylinder B06-MAC50X200SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 200mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke200 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B06-MAC Battery-Specific Cylinder B06-MAC50X200SCA
For a full 200 mm of powered travel, the MAC50X200SCA pairs bore 50 force with a long stainless barrel. It is double acting - compressed air both extends and retracts the 16 mm hard-chrome rod - and a variable air cushion at each end absorbs the shock of the long run. Output is 981.3 N at 0.5 MPa, the operating window is 0.15-1.0 MPa (22-145 psi), and rod speed spans 30-800 mm/s.
Roughly 589 N of that rating is the sensible number for continuous work, which translates to lifting about 50 kg vertically with a 2:1 margin - a real part weight you can match against a hopper gate or die slide. The riveted stainless round body keeps the long 200 mm barrel rigid and sealed in damp plants. Standard magnet, standard CMSG/EMSG switch fit, standard 1/4 inch ports.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC50X200SCA Technical Specifications
| Model | Airtac B06-MAC Battery-Specific Cylinder B06-MAC50X200SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 200 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MAC Battery-Specific Cylinder B06-MAC50X200SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B06-MAC Battery-Specific Cylinder B06-MAC50X200SCA Is Used
Punch press slug ejector
Blows slugs clear of a punch die every stroke; the 200 mm reach clears the bolster and the cushion stops the rod whipping at the end of the hit.
Coffee-bean hopper gate
Modulates the outlet gate on a roastery hopper; about 50 kg of vertical lift opens even a full gate smoothly.
Stretch-wrapper pallet squarer
Squares a pallet before wrapping by pushing it flush against a stop; the long stroke crosses the full turntable width.
Is the Airtac B06-MAC Battery-Specific Cylinder B06-MAC50X200SCA the Right Cylinder?
Strokes between 185 and 200 mm all share this bore 50 force level, so pick the travel the mechanism actually needs rather than upsizing. Below it, a bore 40 MAC saves space at 628.3 N; above it, the bore 63 moves 1557.9 N at the same pressure. A 200 mm stroke on a 16 mm rod asks for external guides if the load can rack or twist. Air off means the piston drifts - the cushion is a shock absorber, never a brake - so add a rod lock or pilot check valve where a punch slide or gate must stay parked. FA flange, LB foot, SDB pivot and CA/U/CM back covers suit every frame layout.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MAC Battery-Specific Cylinder B06-MAC50X200SCA FAQ
At 0.5 MPa it pushes 981.3 N and pulls 880.8 N; at 0.7 MPa it pushes 1373.8 N and pulls 1233.1 N. The theoretical maximum at 1.0 MPa (145 psi) is 200.1 kgf. The 16 mm rod is threaded M14x1.5 and the ports are 1/4 inch.
The 200 mm barrel accepts FA flange, LB foot and SDB pivot brackets, with CA pivot, U flat-end or CM round-end back covers. The magnet is built in as standard equipment, so CMSG, DMSG and EMSG switches mount on the stainless tube without ordering a special piston.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MAC Battery-Specific Cylinder B06-MAC50X200SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.