Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID50X160
AirTAC B06-SID50X160 Battery-Optimized ISO Cylinder Specifications
- Model: B06-SID50X160
- Bore size: 50mm (ISO 6432 standard)
- Stroke: 160mm (±1.5mm tolerance)
- Operating pressure: 0.05–0.8 MPa
- Cushioning: Adjustable pneumatic cushion
- Piston speed: 50–800 mm/s (lubricated)
- Temperature range: -20℃ to 80℃
- Material: Aluminum alloy cylinder tube, chrome-plated piston rod
- Seal type: NBR/FKM optional (standard NBR)
- Port size: M5x0.8 (1/8 PT adaptor available)
- Weight: 2.15kg (with standard accessories)
- Dimensions: 250mm(L) × 62mm(W) × 62mm(H) (at mid-stroke)
- Mounting: ISO 15552 base & rod-end threads (M10x1.25)
- Protection rating: IP65 (standard wiper design)
- Cycle life: 5,000km (under S2 load conditions)
Specialized energy-saving cylinder engineered for battery-powered pneumatic systems. Features low-friction seals (40% reduced breakaway pressure vs standard models) and optimized flow paths for efficient air consumption. Anti-corrosion design with hard anodized barrel surface treatment.
- AGV (Automated Guided Vehicle) lifting mechanisms
- Mobile robotic arm end-effectors
- Solar-powered agricultural actuators
- Portable medical equipment
- Battery-operated assembly fixtures
- Energy harvesting test rigs
Installation tip:
For optimal battery life, maintain 0.3-0.5 MPa operating pressure and
use 5μm filtration. Lubricate monthly with ISO VG32 oil if used in
non-lubricated systems. Avoid lateral loads exceeding 15N.
• Magnetic sensor kit B06-03S
• Energy recovery module ERM-50
• Low-temperature seal variant (-40℃ rating)
| Property | Property Value |
|---|---|
| sku | B06-SID50X160 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.