This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B06-SAID80X150 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B06-SAID80X150 in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X150
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X150 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 150mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the B06-SAID80X150, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke150 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID80X150
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X150
The AirTAC B06-SID80X150 is a discontinued ISO 15552 double-rod, double-acting cylinder where the B06- prefix marks it as a battery-manufacturing dedicated variant, mechanically identical to the base SID80X150. A rod exits both ends on one piston, meaning both faces use the rod-side area and push/pull force is equal at 2268 N @0.5 MPa, 3175 N @0.7 MPa, and 4082 N @0.9 MPa. It features a 25 mm rod, M20x1.5 thread, G3/8 port, and 36 mm adjustable cushions. The exact drop-in replacement is the SAID80X150, which reuses the same ISO 15552 mounting interface, bore, stroke, and port.
The SAI replacement upgrades the piston seal to two Y-shaped one-way elements for lower start-up pressure and longer life. The double-rod design prevents rod rotation and allows the back rod to carry a sensor cam or drive a second tool. For sizing, the safe working load is roughly 1361 N (60% of the 2268 N @0.5 MPa figure), yielding a vertical lift capacity of about 116 kg with a 2:1 margin. Note this SKU lacks the -S magnet and cannot take a sensor. A plain cylinder does not hold loads on air loss; the cushion only decelerates near stroke end, so use an external rod lock or SAIL/BSAI variant for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X150 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X150 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID80X150 |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID80X150 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The B06-SAID80X150 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X150
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X150 Is Used
Battery Cell Stacking
Equal push and pull force drives precise electrode stacking and handling in cell assembly lines without rotational deflection.
Module Tab Welding
The dual-rod configuration drives welding fixtures from both ends, ensuring parallel clamping force during battery module tabbing.
Pack Handling Transfer
Anti-rotation properties allow stable lateral transfers of battery packs on conveyors, maintaining alignment without guide bind.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X150 with the B06-SAID80X150
To replace the discontinued B06-SID80X150, specify the SAID80X150, which is a drop-in match for the ISO 15552 mounting interface (Basic, FA, LB, TC, FTC, TCM1, TCM2), G3/8 port, and 150 mm stroke. Because force is equal both ways, size it by checking neighbouring bores: the 63 mm bore yields 1402 N @0.5 MPa, while the 100 mm bore yields 3681 N @0.5 MPa. Choose a double-rod cylinder when you need anti-rotation stability or must drive two tools from one piston. This non-magnetic SKU cannot accept switches; if sensing is required, select an -S magnet model using legacy CS1-B/DS1-B switches. For strokes of 300 mm or longer, verify side-load limits to prevent guide wear. Operating speed is 30-800 mm/s.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID80X150
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X150 FAQ
Yes, the B06-SID80X150 is discontinued. The B06- prefix simply marks it as the battery-manufacturing dedicated variant of the base SID80X150, changing no physical specs. The exact drop-in replacement is the SAID80X150, which shares the same ISO 15552 interface, 80 mm bore, 150 mm stroke, G3/8 port, and equal-both-ways force.
Because it is a double-rod cylinder, push and pull forces are equal: 2268 N @0.5 MPa, 3175 N @0.7 MPa, and 4082 N @0.9 MPa. The air port is G3/8. The safe working load is approximately 1361 N (60% of the 0.5 MPa figure), allowing a vertical lift of about 116 kg with a 2:1 margin.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID80X150
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID80X150 replacement — usually within 7-8 hours.