This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B06-SAID80X600 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B06-SAID80X600 in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X600
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X600 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 600mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the B06-SAID80X600, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke600 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID80X600
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X600
The AirTAC B06-SID80X600 is a double-acting, double-rod ISO 15552 cylinder where a rod exits both ends, making push and pull force equal at 2268 N @0.5 MPa. The B06- prefix marks this as a battery-manufacturing dedicated variant, mechanically identical to the base SID80X600 with a 600 mm stroke, G3/8 port, and M20x1.5 rod thread. This SID model is discontinued; the exact drop-in replacement is the SAID80X600, which reuses the same ISO 15552 mounting interface and adds an upgraded piston seal using two Y-shaped one-way elements for lower start-up pressure and longer life.
Because both faces use the rod-side area, force is equal both ways (3175 N @0.7 MPa, 4082 N @0.9 MPa). A computed buyer insight from the 2268 N @0.5 MPa rating suggests a safe working load of roughly 1361 N, or a vertical lift capacity of about 116 kg with a 2:1 margin. Note this non-magnetic SKU cannot take a switch, and air cushions only decelerate; they do not hold loads on air loss.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X600 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X600 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID80X600 |
| Bore size | Ø80 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID80X600 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The B06-SAID80X600 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X600
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X600 Is Used
Battery Cell Stacking
Equal-both-ways force drives precision stacking presses in cell assembly, ensuring consistent pressure on both advance and retract strokes.
Module Transfer
The twin-rod anti-rotation特性 keeps battery modules aligned during horizontal transfer across conveyor lines without guide binding.
Tab Welding Clamp
Provides stable, equal clamping for battery tab welding operations, with the back rod available to mount mechanical cams.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X600 with the B06-SAID80X600
To replace the discontinued B06-SID80X600, select the SAID80X600 drop-in, matching the 80 mm bore, 600 mm stroke, G3/8 port, and ISO 15552 mounting (Basic, FA, LB, TC). Size both directions by the equal-both-ways force: 2268 N @0.5 MPa, or step to neighbouring bores (63 mm or 100 mm) if your payload dictates. A double rod is right when you need anti-rotation or must drive two tools. For the 600 mm stroke, use external guides to prevent rod bending under side-load. This SKU lacks the -S magnet, so no sensor is possible.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID80X600
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X600 FAQ
Yes, the B06-SID80X600 (battery-dedicated SID80X600) is discontinued. The exact drop-in replacement is the SAID80X600, sharing the same 80mm bore, 600mm stroke, G3/8 port, and ISO 15552 mounting. The SAI upgrade adds a two Y-shaped one-way piston seal for longer life.
Force is equal both ways: 2268 N @0.5 MPa, 3175 N @0.7 MPa, 4082 N @0.9 MPa. Speed is 30-800 mm/s. Safe working load is ~1361 N (60% of @0.5 MPa), yielding a ~116 kg vertical lift with a 2:1 margin. Air cushions only decelerate; use an external rod lock for load holding.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID80X600
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID80X600 replacement — usually within 7-8 hours.