Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SCA
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø63mm bore and 60mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ63 mm
- Stroke60 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SCA
The MAC63X60SCA sits at the top of the AirTAC MAC mini range: a 63 mm bore, double acting with a variable air cushion at each end, built as a riveted stainless-steel barrel with a hard-chrome plated 16 mm rod and aluminium covers rolled in place. At 0.5 MPa it pushes 1558 N and pulls 1457 N, and the CA pivot back cover pins straight onto swing links and levers without a stack of adapter brackets.
Needle screws at both ends let you bleed cushion air in gradually on first run, the standard-fitted magnet accepts CMSG, DMSG or EMSG switches with no special piston, and the 1/4 inch ports feed a 0.15-1.0 MPa (22-145 psi) supply across 30-800 mm/s.
Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SCA Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (double rod, adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SCA Is Used
Pallet stop and push
Swing-mounted stop arm on a pallet conveyor, using the CA pivot cover and about 935 N of usable push to index loaded pallets into a transfer station.
Hinged guard lift
Pivot arm raises the counterweighted guard of a rinse-filler carousel; the variable cushion keeps the lid from slamming at either end of travel.
Scrap gate under a press
Cycles the weighted flap gate below a punch-press chute, where splashing coolant would eat a painted-steel mini cylinder but not the stainless barrel.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SCA the Right Cylinder?
Size down to a MAC50 bore (981 N push at 0.5 MPa) if your load needs under roughly 550 N of usable force; stay at 63 mm when you want the 2181 N that 0.7 MPa delivers, since no larger MAC bore exists. When the valve centres or air drops the rod drifts freely, so add a rod lock or pilot check valve if the 60 mm position must be kept. SDB pivot brackets, FA flanges and LB feet all suit the same barrel.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SCA FAQ
At 0.5 MPa it pushes 1558 N and pulls 1457 N; at 0.7 MPa the figures rise to 2181 N push and 2040 N pull. The theoretical ceiling at 1.0 MPa is 317.7 kgf. It runs on 0.15-1.0 MPa (22-145 psi) filtered air at 30-800 mm/s with variable cushions at both ends and a standard magnet for CMSG / DMSG / EMSG switches.
It replaces the plain end with a pivot boss, so the cylinder can pin directly into linkage arms and levers. Combined with an SDB pivot bracket or a rod knuckle, a swing motion needs no custom mounting plate, and the cushion adjustment screws stay reachable at both stroke ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.