Airtac MAC Stainless Steel Mini Air Cylinder MAC63X700SCA
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC63X700SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø63mm bore and 700mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ63 mm
- Stroke700 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X700SCA
At 700 mm of travel the MAC63X700SCA stretches well past the 500 mm MA standard list, so it is supplied as an order-built cylinder cut to length before the covers are rolled on. Force is unchanged from the rest of the 63 mm family: 1557.9 N push and 1457.4 N pull at 0.5 MPa, and 2181.0 N extend at 0.7 MPa, double acting throughout.
The stainless round barrel with a hard-chrome 16 mm rod is the right construction for damp factory halls and outdoor plant where painted mini cylinders rust through. For sizing, count on about 935 N of usable push at 0.5 MPa - call it 79 kg of vertical lift with a 2:1 margin - rather than the theoretical 317.7 kgf peak. The piston magnet is standard, ready for CMSG, DMSG or EMSG switches.
Airtac MAC Stainless Steel Mini Air Cylinder MAC63X700SCA Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC63X700SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø63 mm |
| Stroke | 700 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC63X700SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 63 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X700SCA Is Used
High-bay door push arm
About 935 N of working push at 0.5 MPa swings heavy sliding warehouse doors through their track, with the cushion taming the stop.
Bale ejector in a recycling line
A 700 mm stroke shoves compressed plastic bales off the chamber plate, backed by 1557.9 N of extend force at 0.5 MPa.
Grinding machine table advance
Long-travel feed moves a cast-iron table into the wheel zone at 30-800 mm/s with position signals from DMSG switches.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X700SCA the Right Cylinder?
Before committing to 700 mm, check whether a 50 mm bore MAC at 981.3 N push (0.5 MPa) does the job more cheaply; if the load needs the 63 mm class, keep it. Air lost means no holding force of any kind - the cushion only softens arrival, it never locks, so a suspended or rolling load needs a rod lock or pilot check valve. Mount via the CA pivot back cover or add FA flange, LB foot and SDB pivot brackets, with I and Y knuckles protecting the M14x1.5 rod thread. Externally guide any load that could put side load on a 700 mm rod, and note the operating window is 0.15-1.0 MPa (22-145 psi).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC63X700SCA FAQ
Retract force is 1457.4 N at 0.5 MPa and 2040.3 N at 0.7 MPa, while extend reaches 1557.9 N and 2181.0 N at the same pressures. Theoretical peak is 317.7 kgf at 1.0 MPa. Air runs 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s, ports are 1/4 inch, rod thread M14x1.5, and the 700 mm stroke is built to order.
The SCA code gives a CA pivot back cover on PT threading, so clevis pins attach directly. FA flange, LB foot and SDB pivot brackets bolt on as needed, and I or Y rod knuckles join the M14x1.5 thread to the load. Because the stroke exceeds 500 mm, the cylinder is produced to order rather than drawn from the standard list.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC63X700SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.