This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X650CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X650CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 650mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X650CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke650 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X650CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650CA
The AirTAC MAL32X650CA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 650mm stroke. Because 650mm exceeds the 500mm standard limit, this is a made-to-order non-standard stroke. It delivers 402N push and 346N pull at 0.5MPa. The exact drop-in replacement is the MBL32X650CA, matching the bore, stroke, G1/8 port, and CA pivot mounting exactly.
This legacy SKU uses a CA pivot clevis back cover designed to swing on a pin for arcing loads. The original MAL body used threaded front and back covers, whereas the current MBL replacement features a riveted rolling-packed body. Note that this specific configuration lacks an -S magnet, meaning it cannot accept a CS1-M or DS1-M position sensor without upgrading to the MBL equivalent which uses CMSG or DMSG switches.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X650CA |
| Bore size | Ø32 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X650CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X650CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×650 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650CA Is Used
Textile Loom Tensioning
Uses the CA pivot clevis to swing a 650mm long rod assembly, providing 402N of push at 0.5MPa to maintain tension on textile feed rollers without binding.
Package Divert Arm
Executes a 650mm arc stroke to push parcels between sorting lanes, relying on the pivot back cover to accommodate the curved trajectory of the diverter arm.
Palletizing Push-off
Sweeps layered cartons off a stacking platform using the full 650mm extension, applying 563N of thrust at 0.7MPa while the clevis mount absorbs lateral shift.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650CA with MBL32X650CA
To replace the MAL32X650CA, order the MBL32X650CA. Confirm the 32mm bore, 650mm non-standard stroke, G1/8 port, PT thread, and CA pivot back cover. Since this SKU has no -S magnet, you cannot track rod position; if you need sensing, the MBL replacement will require adding a magnet and using CMSG/DMSG/EMSG switches. If your load drifts when air is lost, the fixed rubber bumper will not hold it; you need an external rod lock or pilot-operated check valve. If you need adjustable end-of-stroke cushioning (the MAL only has a fixed bumper), step up to the MBLC series.
At 650mm, the 12mm rod is highly susceptible to side-load bending. You must use the CA pivot to absorb arcing moments or add an external guide rail. For sizing, if 346N pull at 0.5MPa is excessive, step down to the 25mm bore (206N pull); if you need more force, step up to the 40mm bore (528N pull).
Upgrade checklist
- ✓ Order the MBL32X650CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X650CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650CA FAQ
Yes, the MAL32X650CA is discontinued. The exact drop-in replacement is the MBL32X650CA, which matches the 32mm bore, 650mm stroke, G1/8 port, and CA pivot mounting. The newer MBL uses a riveted rolling-packed body instead of the older threaded covers.
The 32mm bore uses a G1/8 port and a 12mm rod with an M10x1.25 rod-end thread. At 0.5MPa it delivers 402N push and 346N pull. At 0.7MPa the push force is 563N. The maximum theoretical force is 82kgf at 1.0MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X650CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650CA → MBL32X650CA)
Tell us the quantity and destination — we quote the drop-in MBL32X650CA replacement with price, stock and lead time, usually within 7-8 hours.