This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X110CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X110CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X110CA (Discontinued) → MBL40X110CA is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 110mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X110CA, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X110CA is a discontinued double-acting aluminum mini round cylinder with a 40mm bore and 110mm stroke. It delivers 628N push and 528N pull at 0.5MPa, utilizing a G1/4 port and a Ø16mm carbon-steel rod with 20um hard-chrome plating. The exact drop-in replacement is the MBL40X110CA, which matches the original force, port size, and CA pivot mounting. This SKU lacks a magnet (-S), meaning it cannot accept a position sensor.
Two structural differences define the upgrade: the legacy MAL uses threaded front and back covers, whereas the current MBL features a riveted rolling-packed body. Internally, the MAL relies on a heterogeneous two-way seal that retains grease alongside a self-lubricating front-cover bearing guide. End-of-stroke deceleration is handled by a fixed rubber bumper, not an adjustable cushion.
| Model | AirTAC MAL40X110CA (Discontinued) → MBL40X110CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X110CA |
| Bore size | Ø40 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X110CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X110CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×110 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Uses the 628N push force at 0.5MPa to deflect heavy wooden pallets on a packaging line, relying on the CA pivot to absorb the angular load.
Secures cast iron engine blocks during machining, where the G1/4 port supplies enough flow for a fast 110mm extension.
Folds heavy corrugated cardboard flaps on a case erector, using the fixed rubber bumper to soften the end of the stroke.
To replace the MAL40X110CA, order the MBL40X110CA. Confirm the 110mm stroke, G1/4 port, PT thread, and the CA pivot back cover, which swings on a pin to absorb arcing loads. If you need position sensing, you must step up to an MBL40X110SCA, as this specific SKU has no magnet. The fixed rubber bumper cannot be adjusted; for heavier kinetic energy, look at the MBLC variant for adjustable air cushioning. A plain cylinder does not hold its load when air drops—the rod drifts—so add an external rod lock for vertical safety.
For sizing, the 40mm bore provides 628N push at 0.5MPa. If you need less force, step down to the 32mm bore (402N push). If you need more, there is no larger MAL/MBL mini round option. Because the stroke is 110mm, the 16mm rod has moderate side-load tolerance; rely on the CA clevis to articulate and prevent rod bending.
Upgrade checklist
Yes, the MAL40X110CA is discontinued. The exact drop-in replacement is the MBL40X110CA, matching the 40mm bore, 110mm stroke, G1/4 port, and CA pivot. The MBL uses a riveted body instead of threaded covers.
At 0.5MPa it pushes 628N and pulls 528N. At 0.7MPa it pushes 880N. The maximum theoretical force is 128kgf at 1.0MPa.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X110CA replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X110CA replacement with price, stock and lead time, usually within 7-8 hours.